Total
33314 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-22045 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix flush_tlb_range() when used for zapping normal PMDs On the following path, flush_tlb_range() can be used for zapping normal PMD entries (PMD entries that point to page tables) together with the PTE entries in the pointed-to page table: collapse_pte_mapped_thp pmdp_collapse_flush flush_tlb_range The arm64 version of flush_tlb_range() has a comment describing that it can be used for page table removal, and does not use any last-level invalidation optimizations. Fix the X86 version by making it behave the same way. Currently, X86 only uses this information for the following two purposes, which I think means the issue doesn't have much impact: - In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be IPI'd to avoid issues with speculative page table walks. - In Hyper-V TLB paravirtualization, again for lazy TLB stuff. The patch "x86/mm: only invalidate final translations with INVLPGB" which is currently under review (see <https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>) would probably be making the impact of this a lot worse. | ||||
| CVE-2025-22021 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: socket: Lookup orig tuple for IPv6 SNAT nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to restore the original 5-tuple in case of SNAT, to be able to find the right socket (if any). Then socket_match() can correctly check whether the socket was transparent. However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this conntrack lookup, making xt_socket fail to match on the socket when the packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6. IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as pods' addresses are in the fd00::/8 ULA subnet and need to be replaced with the node's external address. Cilium leverages Envoy to enforce L7 policies, and Envoy uses transparent sockets. Cilium inserts an iptables prerouting rule that matches on `-m socket --transparent` and redirects the packets to localhost, but it fails to match SNATed IPv6 packets due to that missing conntrack lookup. | ||||
| CVE-2025-22008 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: check that dummy regulator has been probed before using it Due to asynchronous driver probing there is a chance that the dummy regulator hasn't already been probed when first accessing it. | ||||
| CVE-2025-21992 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: ignore non-functional sensor in HP 5MP Camera The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. [453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff [453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff Add this device to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace. | ||||
| CVE-2025-21956 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign normalized_pix_clk when color depth = 14 [WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. (cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775) | ||||
| CVE-2025-21935 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: add check for rio_add_net() in rio_scan_alloc_net() The return value of rio_add_net() should be checked. If it fails, put_device() should be called to free the memory and give up the reference initialized in rio_add_net(). | ||||
| CVE-2025-21926 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: gso: fix ownership in __udp_gso_segment In __udp_gso_segment the skb destructor is removed before segmenting the skb but the socket reference is kept as-is. This is an issue if the original skb is later orphaned as we can hit the following bug: kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan) RIP: 0010:ip_rcv_core+0x8b2/0xca0 Call Trace: ip_rcv+0xab/0x6e0 __netif_receive_skb_one_core+0x168/0x1b0 process_backlog+0x384/0x1100 __napi_poll.constprop.0+0xa1/0x370 net_rx_action+0x925/0xe50 The above can happen following a sequence of events when using OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an OVS_ACTION_ATTR_OUTPUT action: 1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb goes through queue_gso_packets and then __udp_gso_segment, where its destructor is removed. 2. The segments' data are copied and sent to userspace. 3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the same original skb is sent to its path. 4. If it later hits skb_orphan, we hit the bug. Fix this by also removing the reference to the socket in __udp_gso_segment. | ||||
| CVE-2025-21925 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: llc: do not use skb_get() before dev_queue_xmit() syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline] | ||||
| CVE-2025-21916 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix a flaw in existing endpoint checks Syzbot once again identified a flaw in usb endpoint checking, see [1]. This time the issue stems from a commit authored by me (2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")). While using usb_find_common_endpoints() may usually be enough to discard devices with wrong endpoints, in this case one needs more than just finding and identifying the sufficient number of endpoints of correct types - one needs to check the endpoint's address as well. Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind, switch the endpoint verification approach to usb_check_XXX_endpoints() instead to fix incomplete ep testing. [1] Syzbot report: usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649 cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline] cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223 usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058 cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377 usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396 really_probe+0x2b9/0xad0 drivers/base/dd.c:658 __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800 driver_probe_device+0x50/0x430 drivers/base/dd.c:830 ... | ||||
| CVE-2025-21910 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: regulatory: improve invalid hints checking Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> | ||||
| CVE-2025-21877 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix endpoint checking in genelink_bind() Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> | ||||
| CVE-2025-21875 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: always handle address removal under msk socket lock Syzkaller reported a lockdep splat in the PM control path: WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Modules linked in: CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline] RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline] RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283 RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408 RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000 R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0 R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00 FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59 mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486 mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline] mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:733 ____sys_sendmsg+0x53a/0x860 net/socket.c:2573 ___sys_sendmsg net/socket.c:2627 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7e9998cde9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9 RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007 RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088 Indeed the PM can try to send a RM_ADDR over a msk without acquiring first the msk socket lock. The bugged code-path comes from an early optimization: when there are no subflows, the PM should (usually) not send RM_ADDR notifications. The above statement is incorrect, as without locks another process could concur ---truncated--- | ||||
| CVE-2025-21853 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: avoid holding freeze_mutex during mmap operation We use map->freeze_mutex to prevent races between map_freeze() and memory mapping BPF map contents with writable permissions. The way we naively do this means we'll hold freeze_mutex for entire duration of all the mm and VMA manipulations, which is completely unnecessary. This can potentially also lead to deadlocks, as reported by syzbot in [0]. So, instead, hold freeze_mutex only during writeability checks, bump (proactively) "write active" count for the map, unlock the mutex and proceed with mmap logic. And only if something went wrong during mmap logic, then undo that "write active" counter increment. [0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/ | ||||
| CVE-2025-21765 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear. | ||||
| CVE-2025-21738 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-sff: Ensure that we cannot write outside the allocated buffer reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to write outside the allocated buffer, overwriting random memory. While a ATA device is supposed to abort a ATA_NOP command, there does seem to be a bug either in libata-sff or QEMU, where either this status is not set, or the status is cleared before read by ata_sff_hsm_move(). Anyway, that is most likely a separate bug. Looking at __atapi_pio_bytes(), it already has a safety check to ensure that __atapi_pio_bytes() cannot write outside the allocated buffer. Add a similar check to ata_pio_sector(), such that also ata_pio_sector() cannot write outside the allocated buffer. | ||||
| CVE-2025-21728 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Send signals asynchronously if !preemptible BPF programs can execute in all kinds of contexts and when a program running in a non-preemptible context uses the bpf_send_signal() kfunc, it will cause issues because this kfunc can sleep. Change `irqs_disabled()` to `!preemptible()`. | ||||
| CVE-2025-21712 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct md_bitmap_stats"), following panic is reported: Oops: general protection fault, probably for non-canonical address RIP: 0010:bitmap_get_stats+0x2b/0xa0 Call Trace: <TASK> md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that bitmap_get_stats() can be called at anytime if mddev is still there, even if bitmap is destroyed, or not fully initialized. Deferenceing bitmap in this case can crash the kernel. Meanwhile, the above commit start to deferencing bitmap->storage, make the problem easier to trigger. Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex. | ||||
| CVE-2025-21708 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: enable basic endpoint checking Syzkaller reports [1] encountering a common issue of utilizing a wrong usb endpoint type during URB submitting stage. This, in turn, triggers a warning shown below. For now, enable simple endpoint checking (specifically, bulk and interrupt eps, testing control one is not essential) to mitigate the issue with a view to do other related cosmetic changes later, if they are necessary. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv> Modules linked in: CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8> RSP: 0018:ffffc9000441f740 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9 RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001 RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733 __dev_open+0x2d4/0x4e0 net/core/dev.c:1474 __dev_change_flags+0x561/0x720 net/core/dev.c:8838 dev_change_flags+0x8f/0x160 net/core/dev.c:8910 devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177 inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x116/0x280 net/socket.c:1222 sock_ioctl+0x22e/0x6c0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc04ef73d49 ... This change has not been tested on real hardware. | ||||
| CVE-2025-21645 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it Wakeup for IRQ1 should be disabled only in cases where i8042 had actually enabled it, otherwise "wake_depth" for this IRQ will try to drop below zero and there will be an unpleasant WARN() logged: kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug kernel: ------------[ cut here ]------------ kernel: Unbalanced IRQ 1 wake disable kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0 The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and .poweroff handlers. i8042_pm_suspend(), however, is only set as the .suspend handler. Fix the issue by call PMC suspend handler only from the same set of dev_pm_ops handlers as i8042_pm_suspend(), which currently means just the .suspend handler. To reproduce this issue try hibernating (S4) the machine after a fresh boot without putting it into s2idle first. [ij: edited the commit message.] | ||||
| CVE-2024-58090 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_console_sem() was invoked with interrupts enabled. Further instrumentation revealed that in the interrupt disabled section of kexec jump one of the syscore_suspend() callbacks woke up a task, which set the NEED_RESCHED flag. A later callback in the resume path invoked cond_resched() which in turn led to the invocation of the scheduler: __cond_resched+0x21/0x60 down_timeout+0x18/0x60 acpi_os_wait_semaphore+0x4c/0x80 acpi_ut_acquire_mutex+0x3d/0x100 acpi_ns_get_node+0x27/0x60 acpi_ns_evaluate+0x1cb/0x2d0 acpi_rs_set_srs_method_data+0x156/0x190 acpi_pci_link_set+0x11c/0x290 irqrouter_resume+0x54/0x60 syscore_resume+0x6a/0x200 kernel_kexec+0x145/0x1c0 __do_sys_reboot+0xeb/0x240 do_syscall_64+0x95/0x180 This is a long standing problem, which probably got more visible with the recent printk changes. Something does a task wakeup and the scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and invokes schedule() from a completely bogus context. The scheduler enables interrupts after context switching, which causes the above warning at the end. Quite some of the code paths in syscore_suspend()/resume() can result in triggering a wakeup with the exactly same consequences. They might not have done so yet, but as they share a lot of code with normal operations it's just a question of time. The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling models. Full preemption is not affected as cond_resched() is disabled and the preemption check preemptible() takes the interrupt disabled flag into account. Cure the problem by adding a corresponding check into cond_resched(). | ||||