Total
33385 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49405 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan() This code has a check to prevent read overflow but it needs another check to prevent writing beyond the end of the ->Ssid[] array. | ||||
| CVE-2022-49420 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: annotate races around sk->sk_bound_dev_if UDP sendmsg() is lockless, and reads sk->sk_bound_dev_if while this field can be changed by another thread. Adds minimal annotations to avoid KCSAN splats for UDP. Following patches will add more annotations to potential lockless readers. BUG: KCSAN: data-race in __ip6_datagram_connect / udpv6_sendmsg write to 0xffff888136d47a94 of 4 bytes by task 7681 on cpu 0: __ip6_datagram_connect+0x6e2/0x930 net/ipv6/datagram.c:221 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272 inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576 __sys_connect_file net/socket.c:1900 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888136d47a94 of 4 bytes by task 7670 on cpu 1: udpv6_sendmsg+0xc60/0x16e0 net/ipv6/udp.c:1436 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:652 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffff9b Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7670 Comm: syz-executor.3 Tainted: G W 5.18.0-rc1-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 I chose to not add Fixes: tag because race has minor consequences and stable teams busy enough. | ||||
| CVE-2022-49504 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Inhibit aborts if external loopback plug is inserted After running a short external loopback test, when the external loopback is removed and a normal cable inserted that is directly connected to a target device, the system oops in the llpfc_set_rrq_active() routine. When the loopback was inserted an FLOGI was transmit. As we're looped back, we receive the FLOGI request. The FLOGI is ABTS'd as we recognize the same wppn thus understand it's a loopback. However, as the ABTS sends address information the port is not set to (fffffe), the ABTS is dropped on the wire. A short 1 frame loopback test is run and completes before the ABTS times out. The looback is unplugged and the new cable plugged in, and the an FLOGI to the new device occurs and completes. Due to a mixup in ref counting the completion of the new FLOGI releases the fabric ndlp. Then the original ABTS completes and references the released ndlp generating the oops. Correct by no-op'ing the ABTS when in loopback mode (it will be dropped anyway). Added a flag to track the mode to recognize when it should be no-op'd. | ||||
| CVE-2022-49506 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add vblank register/unregister callback functions We encountered a kernel panic issue that callback data will be NULL when it's using in ovl irq handler. There is a timing issue between mtk_disp_ovl_irq_handler() and mtk_ovl_disable_vblank(). To resolve this issue, we use the flow to register/unregister vblank cb: - Register callback function and callback data when crtc creates. - Unregister callback function and callback data when crtc destroies. With this solution, we can assure callback data will not be NULL when vblank is disable. | ||||
| CVE-2022-49511 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: fix the pagelist corruption Easily hit the below list corruption: == list_add corruption. prev->next should be next (ffffffffc0ceb090), but was ffffec604507edc8. (prev=ffffec604507edc8). WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26 __list_add_valid+0x53/0x80 CPU: 65 PID: 3959 Comm: fbdev Tainted: G U RIP: 0010:__list_add_valid+0x53/0x80 Call Trace: <TASK> fb_deferred_io_mkwrite+0xea/0x150 do_page_mkwrite+0x57/0xc0 do_wp_page+0x278/0x2f0 __handle_mm_fault+0xdc2/0x1590 handle_mm_fault+0xdd/0x2c0 do_user_addr_fault+0x1d3/0x650 exc_page_fault+0x77/0x180 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fd98fc8fad1 == Figure out the race happens when one process is adding &page->lru into the pagelist tail in fb_deferred_io_mkwrite(), another process is re-initializing the same &page->lru in fb_deferred_io_fault(), which is not protected by the lock. This fix is to init all the page lists one time during initialization, it not only fixes the list corruption, but also avoids INIT_LIST_HEAD() redundantly. V2: change "int i" to "unsigned int i" (Geert Uytterhoeven) | ||||
| CVE-2022-49512 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: denali: Use managed device resources All of the resources used by this driver has managed interfaces, so use them. Otherwise we will get the following splat: [ 4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000 [ 4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5 [ 4.473538] nand: No NAND device found [ 4.474068] BUG: unable to handle page fault for address: ffffc90005000410 [ 4.475169] #PF: supervisor write access in kernel mode [ 4.475579] #PF: error_code(0x0002) - not-present page [ 4.478362] RIP: 0010:iowrite32+0x9/0x50 [ 4.486068] Call Trace: [ 4.486269] <IRQ> [ 4.486443] denali_isr+0x15b/0x300 [denali] [ 4.486788] ? denali_direct_write+0x50/0x50 [denali] [ 4.487189] __handle_irq_event_percpu+0x161/0x3b0 [ 4.487571] handle_irq_event+0x7d/0x1b0 [ 4.487884] handle_fasteoi_irq+0x2b0/0x770 [ 4.488219] __common_interrupt+0xc8/0x1b0 [ 4.488549] common_interrupt+0x9a/0xc0 | ||||
| CVE-2022-49513 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: Use kobject release() method to free dbs_data The struct dbs_data embeds a struct gov_attr_set and the struct gov_attr_set embeds a kobject. Since every kobject must have a release() method and we can't use kfree() to free it directly, so introduce cpufreq_dbs_data_release() to release the dbs_data via the kobject::release() method. This fixes the calltrace like below: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34 WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ #536 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001dfcf9a0 x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000 x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210 x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118 x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000 x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8 x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14 x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0 x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1d0/0x25c debug_check_no_obj_freed+0x24/0xa0 kfree+0x11c/0x440 cpufreq_dbs_governor_exit+0xa8/0xac cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x29c/0x570 store_scaling_governor+0x110/0x154 store+0xb0/0xe0 sysfs_kf_write+0x58/0x84 kernfs_fop_write_iter+0x12c/0x1c0 new_sync_write+0xf0/0x18c vfs_write+0x1cc/0x220 ksys_write+0x74/0x100 __arm64_sys_write+0x28/0x3c invoke_syscall.constprop.0+0x58/0xf0 do_el0_svc+0x70/0x170 el0_svc+0x54/0x190 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x1a0/0x1a4 irq event stamp: 189006 hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0 hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0 softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0 softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4 [ rjw: Because can be freed by the gov_attr_set_put() in cpufreq_dbs_governor_exit() now, it is also necessary to put the invocation of the governor ->exit() callback into the new cpufreq_dbs_data_release() function. ] | ||||
| CVE-2022-49520 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall If a compat process tries to execute an unknown system call above the __ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the offending process. Information about the error is printed to dmesg in compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() -> arm64_show_signal(). arm64_show_signal() interprets a non-zero value for current->thread.fault_code as an exception syndrome and displays the message associated with the ESR_ELx.EC field (bits 31:26). current->thread.fault_code is set in compat_arm_syscall() -> arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx value. This means that the ESR_ELx.EC field has the value that the user set for the syscall number and the kernel can end up printing bogus exception messages*. For example, for the syscall number 0x68000000, which evaluates to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error: [ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000] [ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79 [ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which is misleading, as the bad compat syscall has nothing to do with pointer authentication. Stop arm64_show_signal() from printing exception syndrome information by having compat_arm_syscall() set the ESR_ELx value to 0, as it has no meaning for an invalid system call number. The example above now becomes: [ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000] [ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80 [ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which although shows less information because the syscall number, wrongfully advertised as the ESR value, is missing, it is better than showing plainly wrong information. The syscall number can be easily obtained with strace. *A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END evaluates to true; the syscall will exit to userspace in this case with the ENOSYS error code instead of arm64_notify_die() being called. | ||||
| CVE-2022-49522 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: jz4740: Apply DMA engine limits to maximum segment size Do what is done in other DMA-enabled MMC host drivers (cf. host/mmci.c) and limit the maximum segment size based on the DMA engine's capabilities. This is needed to avoid warnings like the following with CONFIG_DMA_API_DEBUG=y. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2f4/0x39c DMA-API: jz4780-dma 13420000.dma-controller: mapping sg segment longer than device claims to support [len=98304] [max=65536] CPU: 0 PID: 21 Comm: kworker/0:1H Not tainted 5.18.0-rc1 #19 Workqueue: kblockd blk_mq_run_work_fn Stack : 81575aec 00000004 80620000 80620000 80620000 805e7358 00000009 801537ac 814c832c 806276e3 806e34b4 80620000 81575aec 00000001 81575ab8 09291444 00000000 00000000 805e7358 81575958 ffffffea 8157596c 00000000 636f6c62 6220646b 80387a70 0000000f 6d5f6b6c 80620000 00000000 81575ba4 00000009 805e170c 80896640 00000001 00010000 00000000 00000000 00006098 806e0000 ... Call Trace: [<80107670>] show_stack+0x84/0x120 [<80528cd8>] __warn+0xb8/0xec [<80528d78>] warn_slowpath_fmt+0x6c/0xb8 [<8016f1d4>] debug_dma_map_sg+0x2f4/0x39c [<80169d4c>] __dma_map_sg_attrs+0xf0/0x118 [<8016a27c>] dma_map_sg_attrs+0x14/0x28 [<804f66b4>] jz4740_mmc_prepare_dma_data+0x74/0xa4 [<804f6714>] jz4740_mmc_pre_request+0x30/0x54 [<804f4ff4>] mmc_blk_mq_issue_rq+0x6e0/0x7bc [<804f5590>] mmc_mq_queue_rq+0x220/0x2d4 [<8038b2c0>] blk_mq_dispatch_rq_list+0x480/0x664 [<80391040>] blk_mq_do_dispatch_sched+0x2dc/0x370 [<80391468>] __blk_mq_sched_dispatch_requests+0xec/0x164 [<80391540>] blk_mq_sched_dispatch_requests+0x44/0x94 [<80387900>] __blk_mq_run_hw_queue+0xb0/0xcc [<80134c14>] process_one_work+0x1b8/0x264 [<80134ff8>] worker_thread+0x2ec/0x3b8 [<8013b13c>] kthread+0x104/0x10c [<80101dcc>] ret_from_kernel_thread+0x14/0x1c ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-49525 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix the warning when removing the module When removing the module, we will get the following warning: [ 14.746697] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'cx25821[1]' [ 14.747449] WARNING: CPU: 4 PID: 368 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0 [ 14.751611] RIP: 0010:remove_proc_entry+0x389/0x3f0 [ 14.759589] Call Trace: [ 14.759792] <TASK> [ 14.759975] unregister_irq_proc+0x14c/0x170 [ 14.760340] irq_free_descs+0x94/0xe0 [ 14.760640] mp_unmap_irq+0xb6/0x100 [ 14.760937] acpi_unregister_gsi_ioapic+0x27/0x40 [ 14.761334] acpi_pci_irq_disable+0x1d3/0x320 [ 14.761688] pci_disable_device+0x1ad/0x380 [ 14.762027] ? _raw_spin_unlock_irqrestore+0x2d/0x60 [ 14.762442] ? cx25821_shutdown+0x20/0x9f0 [cx25821] [ 14.762848] cx25821_finidev+0x48/0xc0 [cx25821] [ 14.763242] pci_device_remove+0x92/0x240 Fix this by freeing the irq before call pci_disable_device(). | ||||
| CVE-2022-49528 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: dw9714: Disable the regulator when the driver fails to probe When the driver fails to probe, we will get the following splat: [ 59.305988] ------------[ cut here ]------------ [ 59.306417] WARNING: CPU: 2 PID: 395 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 59.310345] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 59.318362] Call Trace: [ 59.318582] <TASK> [ 59.318765] regulator_put+0x1f/0x30 [ 59.319058] devres_release_group+0x319/0x3d0 [ 59.319420] i2c_device_probe+0x766/0x940 Fix this by disabling the regulator in error handling. | ||||
| CVE-2022-49533 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: Change max no of active probe SSID and BSSID to fw capability The maximum number of SSIDs in a for active probe requests is currently reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver. The scan_req_params structure only has the capacity to hold 10 SSIDs. This leads to a buffer overflow which can be triggered from wpa_supplicant in userspace. When copying the SSIDs into the scan_req_params structure in the ath11k_mac_op_hw_scan route, it can overwrite the extraie pointer. Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe request will be sent, so totally 64 probe requests supported. So set both max ssid and bssid to 16 and 4 respectively. Remove the redundant macros of ssid and bssid. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-53860 | 1 F5 | 3 F5os-a, R10920-df, R5920-df | 2025-10-21 | 4.1 Medium |
| A vulnerability exists in F5OS-A software that allows a highly privileged authenticated attacker to access sensitive FIPS hardware security module (HSM) information on F5 rSeries systems. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2022-49189 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: qcom: clk-rcg2: Update logic to calculate D value for RCG The display pixel clock has a requirement on certain newer platforms to support M/N as (2/3) and the final D value calculated results in underflow errors. As the current implementation does not check for D value is within the accepted range for a given M & N value. Update the logic to calculate the final D value based on the range. | ||||
| CVE-2022-49192 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync when successful. pm_runtime_get_sync returns -error code on failure and 0 on successful resume but also 1 when the device is already active. So the common case for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls to pm_runtime_put in the call-chain so that pm_runtime_put is called one too many times and as result leaving the cpsw dev behind suspended. The suspended cpsw dev leads to an access violation later on by different parts of the cpsw driver. Fix this by calling the return-friendly pm_runtime_resume_and_get function. | ||||
| CVE-2022-49193 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix 'scheduling while atomic' on aux critical err interrupt There's a kernel BUG splat on processing aux critical error interrupts in ice_misc_intr(): [ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000 ... [ 2101.060770] Call Trace: [ 2101.063229] <IRQ> [ 2101.065252] dump_stack+0x41/0x60 [ 2101.068587] __schedule_bug.cold.100+0x4c/0x58 [ 2101.073060] __schedule+0x6a4/0x830 [ 2101.076570] schedule+0x35/0xa0 [ 2101.079727] schedule_preempt_disabled+0xa/0x10 [ 2101.084284] __mutex_lock.isra.7+0x310/0x420 [ 2101.088580] ? ice_misc_intr+0x201/0x2e0 [ice] [ 2101.093078] ice_send_event_to_aux+0x25/0x70 [ice] [ 2101.097921] ice_misc_intr+0x220/0x2e0 [ice] [ 2101.102232] __handle_irq_event_percpu+0x40/0x180 [ 2101.106965] handle_irq_event_percpu+0x30/0x80 [ 2101.111434] handle_irq_event+0x36/0x53 [ 2101.115292] handle_edge_irq+0x82/0x190 [ 2101.119148] handle_irq+0x1c/0x30 [ 2101.122480] do_IRQ+0x49/0xd0 [ 2101.125465] common_interrupt+0xf/0xf [ 2101.129146] </IRQ> ... As Andrew correctly mentioned previously[0], the following call ladder happens: ice_misc_intr() <- hardirq ice_send_event_to_aux() device_lock() mutex_lock() might_sleep() might_resched() <- oops Add a new PF state bit which indicates that an aux critical error occurred and serve it in ice_service_task() in process context. The new ice_pf::oicr_err_reg is read-write in both hardirq and process contexts, but only 3 bits of non-critical data probably aren't worth explicit synchronizing (and they're even in the same byte [31:24]). [0] https://lore.kernel.org/all/YeSRUVmrdmlUXHDn@lunn.ch | ||||
| CVE-2022-49194 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Use stronger register read/writes to assure ordering GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like: [ 210.074549] ------------[ cut here ]------------ [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240 [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat] [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110 [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58 [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters [ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022 [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 210.161358] pc : dev_watchdog+0x234/0x240 [ 210.161364] lr : dev_watchdog+0x234/0x240 [ 210.161368] sp : ffff8000080a3a40 [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20 [ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08 [ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000 [ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0 [ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c [ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000 [ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000 [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044 [ 210.269682] Call trace: [ 210.272133] dev_watchdog+0x234/0x240 [ 210.275811] call_timer_fn+0x3c/0x15c [ 210.279489] __run_timers.part.0+0x288/0x310 [ 210.283777] run_timer_softirq+0x48/0x80 [ 210.287716] __do_softirq+0x128/0x360 [ 210.291392] __irq_exit_rcu+0x138/0x140 [ 210.295243] irq_exit_rcu+0x1c/0x30 [ 210.298745] el1_interrupt+0x38/0x54 [ 210.302334] el1h_64_irq_handler+0x18/0x24 [ 210.306445] el1h_64_irq+0x7c/0x80 [ 210.309857] arch_cpu_idle+0x18/0x2c [ 210.313445] default_idle_call+0x4c/0x140 [ 210.317470] cpuidle_idle_call+0x14c/0x1a0 [ 210.321584] do_idle+0xb0/0x100 [ 210.324737] cpu_startup_entry+0x30/0x8c [ 210.328675] secondary_start_kernel+0xe4/0x110 [ 210.333138] __secondary_switched+0x94/0x98 The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations. Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere. Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems ---truncated--- | ||||
| CVE-2022-49204 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix more uncharged while msg has more_data In tcp_bpf_send_verdict(), if msg has more data after tcp_bpf_sendmsg_redir(): tcp_bpf_send_verdict() tosend = msg->sg.size //msg->sg.size = 22220 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000 goto more_data; tosend = msg->sg.size //msg->sg.size = 11000 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc The msg->sg.size(11000) has been uncharged twice, to fix we can charge the remaining msg->sg.size before goto more data. This issue can cause the following info: WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 ? vfs_write+0x237/0x290 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> | ||||
| CVE-2022-49227 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igc: avoid kernel warning when changing RX ring parameters Calling ethtool changing the RX ring parameters like this: $ ethtool -G eth0 rx 1024 on igc triggers kernel warnings like this: [ 225.198467] ------------[ cut here ]------------ [ 225.198473] Missing unregister, handled but fix driver [ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168 xdp_rxq_info_reg+0x79/0xd0 [...] [ 225.198601] Call Trace: [ 225.198604] <TASK> [ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc] [ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc] [ 225.198626] ethnl_set_rings+0x18a/0x250 [ 225.198631] genl_family_rcv_msg_doit+0xca/0x110 [ 225.198637] genl_rcv_msg+0xce/0x1c0 [ 225.198640] ? rings_prepare_data+0x60/0x60 [ 225.198644] ? genl_get_cmd+0xd0/0xd0 [ 225.198647] netlink_rcv_skb+0x4e/0xf0 [ 225.198652] genl_rcv+0x24/0x40 [ 225.198655] netlink_unicast+0x20e/0x330 [ 225.198659] netlink_sendmsg+0x23f/0x480 [ 225.198663] sock_sendmsg+0x5b/0x60 [ 225.198667] __sys_sendto+0xf0/0x160 [ 225.198671] ? handle_mm_fault+0xb2/0x280 [ 225.198676] ? do_user_addr_fault+0x1eb/0x690 [ 225.198680] __x64_sys_sendto+0x20/0x30 [ 225.198683] do_syscall_64+0x38/0x90 [ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 225.198693] RIP: 0033:0x7f7ae38ac3aa igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to reset the xdp_rxq_info member before calling igc_setup_rx_resources(). This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info. Make sure to unregister the xdp_rxq_info structure first in igc_setup_rx_resources. | ||||
| CVE-2022-49226 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: asix: add proper error handling of usb read errors Syzbot once again hit uninit value in asix driver. The problem still the same -- asix_read_cmd() reads less bytes, than was requested by caller. Since all read requests are performed via asix_read_cmd() let's catch usb related error there and add __must_check notation to be sure all callers actually check return value. So, this patch adds sanity check inside asix_read_cmd(), that simply checks if bytes read are not less, than was requested and adds missing error handling of asix_read_cmd() all across the driver code. | ||||