Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
14538 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50576 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: pch: Fix PCI device refcount leak in pch_request_dma() As comment of pci_get_slot() says, it returns a pci_device with its refcount increased. The caller must decrement the reference count by calling pci_dev_put(). Since 'dma_dev' is only used to filter the channel in filter(), we can call pci_dev_put() before exiting from pch_request_dma(). Add the missing pci_dev_put() for the normal and error path. | ||||
| CVE-2023-53698 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix refcount underflow in error path Fix a refcount underflow problem reported by syzbot that can happen when a system is running out of memory. If xp_alloc_tx_descs() fails, and it can only fail due to not having enough memory, then the error path is triggered. In this error path, the refcount of the pool is decremented as it has incremented before. However, the reference to the pool in the socket was not nulled. This means that when the socket is closed later, the socket teardown logic will think that there is a pool attached to the socket and try to decrease the refcount again, leading to a refcount underflow. I chose this fix as it involved adding just a single line. Another option would have been to move xp_get_pool() and the assignment of xs->pool to after the if-statement and using xs_umem->pool instead of xs->pool in the whole if-statement resulting in somewhat simpler code, but this would have led to much more churn in the code base perhaps making it harder to backport. | ||||
| CVE-2022-50558 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode Commit faa87ce9196d ("regmap-irq: Introduce config registers for irq types") added the num_config_regs, then commit 9edd4f5aee84 ("regmap-irq: Deprecate type registers and virtual registers") suggested to replace num_type_reg with it. However, regmap_add_irq_chip_fwnode wasn't modified to use the new property. Later on, commit 255a03bb1bb3 ("ASoC: wcd9335: Convert irq chip to config regs") removed the old num_type_reg property from the WCD9335 driver's struct regmap_irq_chip, causing a null pointer dereference in regmap_irq_set_type when it tried to index d->type_buf as it was never allocated in regmap_add_irq_chip_fwnode: [ 39.199374] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 39.200006] Call trace: [ 39.200014] regmap_irq_set_type+0x84/0x1c0 [ 39.200026] __irq_set_trigger+0x60/0x1c0 [ 39.200040] __setup_irq+0x2f4/0x78c [ 39.200051] request_threaded_irq+0xe8/0x1a0 Use num_config_regs in regmap_add_irq_chip_fwnode instead of num_type_reg, and fall back to it if num_config_regs isn't defined to maintain backward compatibility. | ||||
| CVE-2022-50556 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: Fix potential null-ptr-deref due to drmm_mode_config_init() drmm_mode_config_init() will call drm_mode_create_standard_properties() and won't check the ret value. When drm_mode_create_standard_properties() failed due to alloc, property will be a NULL pointer and may causes the null-ptr-deref. Fix the null-ptr-deref by adding the ret value check. Found null-ptr-deref while testing insert module bochs: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm] Call Trace: <TASK> __drm_connector_init+0xb6c/0x1100 [drm] bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs] pci_device_probe+0x17d/0x340 really_probe+0x1db/0x5d0 __driver_probe_device+0x1e7/0x250 driver_probe_device+0x4a/0x120 __driver_attach+0xcd/0x2c0 bus_for_each_dev+0x11a/0x1b0 bus_add_driver+0x3d7/0x500 driver_register+0x18e/0x320 do_one_initcall+0xc4/0x3e0 do_init_module+0x1b4/0x630 load_module+0x5dca/0x7230 __do_sys_finit_module+0x100/0x170 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff65af9f839 | ||||
| CVE-2023-53694 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: ftrace: Fixup panic by disabling preemption In RISCV, we must use an AUIPC + JALR pair to encode an immediate, forming a jump that jumps to an address over 4K. This may cause errors if we want to enable kernel preemption and remove dependency from patching code with stop_machine(). For example, if a task was switched out on auipc. And, if we changed the ftrace function before it was switched back, then it would jump to an address that has updated 11:0 bits mixing with previous XLEN:12 part. p: patched area performed by dynamic ftrace ftrace_prologue: p| REG_S ra, -SZREG(sp) p| auipc ra, 0x? ------------> preempted ... change ftrace function ... p| jalr -?(ra) <------------- switched back p| REG_L ra, -SZREG(sp) func: xxx ret | ||||
| CVE-2022-50574 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/omap: dss: Fix refcount leak bugs In dss_init_ports() and __dss_uninit_ports(), we should call of_node_put() for the reference returned by of_graph_get_port_by_id() in fail path or when it is not used anymore. | ||||
| CVE-2022-50581 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: fix OOB Read in __hfs_brec_find Syzbot reported a OOB read bug: ================================================================== BUG: KASAN: slab-out-of-bounds in hfs_strcmp+0x117/0x190 fs/hfs/string.c:84 Read of size 1 at addr ffff88807eb62c4e by task kworker/u4:1/11 CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted 6.1.0-rc6-syzkaller-00308-g644e9524388a #0 Workqueue: writeback wb_workfn (flush-7:0) Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 hfs_strcmp+0x117/0x190 fs/hfs/string.c:84 __hfs_brec_find+0x213/0x5c0 fs/hfs/bfind.c:75 hfs_brec_find+0x276/0x520 fs/hfs/bfind.c:138 hfs_write_inode+0x34c/0xb40 fs/hfs/inode.c:462 write_inode fs/fs-writeback.c:1440 [inline] If the input inode of hfs_write_inode() is incorrect: struct inode struct hfs_inode_info struct hfs_cat_key struct hfs_name u8 len # len is greater than HFS_NAMELEN(31) which is the maximum length of an HFS filename OOB read occurred: hfs_write_inode() hfs_brec_find() __hfs_brec_find() hfs_cat_keycmp() hfs_strcmp() # OOB read occurred due to len is too large Fix this by adding a Check on len in hfs_write_inode() before calling hfs_brec_find(). | ||||
| CVE-2022-50561 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: fix memory leak in iio_device_register_eventset() When iio_device_register_sysfs_group() returns failed, iio_device_register_eventset() needs to free attrs array. Otherwise, kmemleak would scan & report memory leak as below: unreferenced object 0xffff88810a1cc3c0 (size 32): comm "100-i2c-vcnl302", pid 728, jiffies 4295052307 (age 156.027s) backtrace: __kmalloc+0x46/0x1b0 iio_device_register_eventset at drivers/iio/industrialio-event.c:541 __iio_device_register at drivers/iio/industrialio-core.c:1959 __devm_iio_device_register at drivers/iio/industrialio-core.c:2040 | ||||
| CVE-2022-50573 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks Coverity message: variable "buf" going out of scope leaks the storage. Addresses-Coverity-ID: 1527799 ("Resource leaks") | ||||
| CVE-2022-50566 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: Fix device name leak when register device failed in add_mtd_device() There is a kmemleak when register device failed: unreferenced object 0xffff888101aab550 (size 8): comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s) hex dump (first 8 bytes): 6d 74 64 30 00 88 ff ff mtd0.... backtrace: [<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150 [<000000003c32b416>] kvasprintf+0xb0/0x130 [<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0 [<000000006e781163>] dev_set_name+0xab/0xe0 [<00000000e30d0c78>] add_mtd_device+0x4bb/0x700 [<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0 [<00000000c0d88488>] 0xffffffffa0238457 [<00000000b40d0922>] 0xffffffffa02a008f [<0000000023d17b9d>] do_one_initcall+0x87/0x2a0 [<00000000770f6ca6>] do_init_module+0xdf/0x320 [<000000007b6768fe>] load_module+0x2f98/0x3330 [<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0 [<00000000674c2290>] do_syscall_64+0x35/0x80 [<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 If register device failed, should call put_device() to give up the reference. | ||||
| CVE-2022-50571 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: call __btrfs_remove_free_space_cache_locked on cache load failure Now that lockdep is staying enabled through our entire CI runs I started seeing the following stack in generic/475 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2171864 at fs/btrfs/discard.c:604 btrfs_discard_update_discardable+0x98/0xb0 CPU: 1 PID: 2171864 Comm: kworker/u4:0 Not tainted 5.19.0-rc8+ #789 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:btrfs_discard_update_discardable+0x98/0xb0 RSP: 0018:ffffb857c2f7bad0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c85c605c200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff86807c5b RDI: ffffffff868a831e RBP: ffff8c85c4c54000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8c85c66932f0 R11: 0000000000000001 R12: ffff8c85c3899010 R13: ffff8c85d5be4f40 R14: ffff8c85c4c54000 R15: ffff8c86114bfa80 FS: 0000000000000000(0000) GS:ffff8c863bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2e7f168160 CR3: 000000010289a004 CR4: 0000000000370ee0 Call Trace: __btrfs_remove_free_space_cache+0x27/0x30 load_free_space_cache+0xad2/0xaf0 caching_thread+0x40b/0x650 ? lock_release+0x137/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_is_held_type+0xe2/0x140 process_one_work+0x271/0x590 ? process_one_work+0x590/0x590 worker_thread+0x52/0x3b0 ? process_one_work+0x590/0x590 kthread+0xf0/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 This is the code ctl = block_group->free_space_ctl; discard_ctl = &block_group->fs_info->discard_ctl; lockdep_assert_held(&ctl->tree_lock); We have a temporary free space ctl for loading the free space cache in order to avoid having allocations happening while we're loading the cache. When we hit an error we free it all up, however this also calls btrfs_discard_update_discardable, which requires block_group->free_space_ctl->tree_lock to be held. However this is our temporary ctl so this lock isn't held. Fix this by calling __btrfs_remove_free_space_cache_locked instead so that we only clean up the entries and do not mess with the discardable stats. | ||||
| CVE-2022-50563 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix UAF in run_timer_softirq() When dm_resume() and dm_destroy() are concurrent, it will lead to UAF, as follows: BUG: KASAN: use-after-free in __run_timers+0x173/0x710 Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0 <snip> Call Trace: <IRQ> dump_stack_lvl+0x73/0x9f print_report.cold+0x132/0xaa2 _raw_spin_lock_irqsave+0xcd/0x160 __run_timers+0x173/0x710 kasan_report+0xad/0x110 __run_timers+0x173/0x710 __asan_store8+0x9c/0x140 __run_timers+0x173/0x710 call_timer_fn+0x310/0x310 pvclock_clocksource_read+0xfa/0x250 kvm_clock_read+0x2c/0x70 kvm_clock_get_cycles+0xd/0x20 ktime_get+0x5c/0x110 lapic_next_event+0x38/0x50 clockevents_program_event+0xf1/0x1e0 run_timer_softirq+0x49/0x90 __do_softirq+0x16e/0x62c __irq_exit_rcu+0x1fa/0x270 irq_exit_rcu+0x12/0x20 sysvec_apic_timer_interrupt+0x8e/0xc0 One of the concurrency UAF can be shown as below: use free do_resume | __find_device_hash_cell | dm_get | atomic_inc(&md->holders) | | dm_destroy | __dm_destroy | if (!dm_suspended_md(md)) | atomic_read(&md->holders) | msleep(1) dm_resume | __dm_resume | dm_table_resume_targets | pool_resume | do_waker #add delay work | dm_put | atomic_dec(&md->holders) | | dm_table_destroy | pool_dtr | __pool_dec | __pool_destroy | destroy_workqueue | kfree(pool) # free pool time out __do_softirq run_timer_softirq # pool has already been freed This can be easily reproduced using: 1. create thin-pool 2. dmsetup suspend pool 3. dmsetup resume pool 4. dmsetup remove_all # Concurrent with 3 The root cause of this UAF bug is that dm_resume() adds timer after dm_destroy() skips cancelling the timer because of suspend status. After timeout, it will call run_timer_softirq(), however pool has already been freed. The concurrency UAF bug will happen. Therefore, cancelling timer again in __pool_destroy(). | ||||
| CVE-2022-50559 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: imx: scu: fix memleak on platform_device_add() fails No error handling is performed when platform_device_add() fails. Add error processing before return, and modified the return value. | ||||
| CVE-2022-50565 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: plfxlc: fix potential memory leak in __lf_x_usb_enable_rx() urbs does not be freed in exception paths in __lf_x_usb_enable_rx(). That will trigger memory leak. To fix it, add kfree() for urbs within "error" label. Compile tested only. | ||||
| CVE-2022-50572 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link() The of_get_next_child() returns a node with refcount incremented, and decrements the refcount of prev. So in the error path of the while loop, of_node_put() needs be called for cpu_ep. | ||||
| CVE-2022-50579 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ftrace: fix module PLTs with mcount Li Huafei reports that mcount-based ftrace with module PLTs was broken by commit: a6253579977e4c6f ("arm64: ftrace: consistently handle PLTs.") When a module PLTs are used and a module is loaded sufficiently far away from the kernel, we'll create PLTs for any branches which are out-of-range. These are separate from the special ftrace trampoline PLTs, which the module PLT code doesn't directly manipulate. When mcount is in use this is a problem, as each mcount callsite in a module will be initialized to point to a module PLT, but since commit a6253579977e4c6f ftrace_make_nop() will assume that the callsite has been initialized to point to the special ftrace trampoline PLT, and ftrace_find_callable_addr() rejects other cases. This means that when ftrace tries to initialize a callsite via ftrace_make_nop(), the call to ftrace_find_callable_addr() will find that the `_mcount` stub is out-of-range and is not handled by the ftrace PLT, resulting in a splat: | ftrace_test: loading out-of-tree module taints kernel. | ftrace: no module PLT for _mcount | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffff800029180014>] 0xffff800029180014 | actual: 44:00:00:94 | Initializing ftrace call sites | ftrace record flags: 2000000 | (0) | expected tramp: ffff80000802eb3c | ------------[ cut here ]------------ | WARNING: CPU: 3 PID: 157 at kernel/trace/ftrace.c:2120 ftrace_bug+0x94/0x270 | Modules linked in: | CPU: 3 PID: 157 Comm: insmod Tainted: G O 6.0.0-rc6-00151-gcd722513a189-dirty #22 | Hardware name: linux,dummy-virt (DT) | pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x94/0x270 | lr : ftrace_bug+0x21c/0x270 | sp : ffff80000b2bbaf0 | x29: ffff80000b2bbaf0 x28: 0000000000000000 x27: ffff0000c4d38000 | x26: 0000000000000001 x25: ffff800009d7e000 x24: ffff0000c4d86e00 | x23: 0000000002000000 x22: ffff80000a62b000 x21: ffff8000098ebea8 | x20: ffff0000c4d38000 x19: ffff80000aa24158 x18: ffffffffffffffff | x17: 0000000000000000 x16: 0a0d2d2d2d2d2d2d x15: ffff800009aa9118 | x14: 0000000000000000 x13: 6333626532303830 x12: 3030303866666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : 3362653230383030 | x8 : c0000000ffffefff x7 : 0000000000017fe8 x6 : 000000000000bff4 | x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000001 | x2 : ad2cb14bb5438900 x1 : 0000000000000000 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x94/0x270 | ftrace_process_locs+0x308/0x430 | ftrace_module_init+0x44/0x60 | load_module+0x15b4/0x1ce8 | __do_sys_init_module+0x1ec/0x238 | __arm64_sys_init_module+0x24/0x30 | invoke_syscall+0x54/0x118 | el0_svc_common.constprop.4+0x84/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x1c/0x50 | el0t_64_sync_handler+0x90/0xb8 | el0t_64_sync+0x15c/0x160 | ---[ end trace 0000000000000000 ]--- | ---------test_init----------- Fix this by reverting to the old behaviour of ignoring the old instruction when initialising an mcount callsite in a module, which was the behaviour prior to commit a6253579977e4c6f. | ||||
| CVE-2022-50562 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: acpi: Call acpi_put_table() to fix memory leak The start and length of the event log area are obtained from TPM2 or TCPA table, so we call acpi_get_table() to get the ACPI information, but the acpi_get_table() should be coupled with acpi_put_table() to release the ACPI memory, add the acpi_put_table() properly to fix the memory leak. While we are at it, remove the redundant empty line at the end of the tpm_read_log_acpi(). | ||||
| CVE-2022-50578 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: class: fix possible memory leak in __class_register() If class_add_groups() returns error, the 'cp->subsys' need be unregister, and the 'cp' need be freed. We can not call kset_unregister() here, because the 'cls' will be freed in callback function class_release() and it's also freed in caller's error path, it will cause double free. So fix this by calling kobject_del() and kfree_const(name) to cleanup kobject. Besides, call kfree() to free the 'cp'. Fault injection test can trigger this: unreferenced object 0xffff888102fa8190 (size 8): comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s) hex dump (first 8 bytes): 70 6b 74 63 64 76 64 00 pktcdvd. backtrace: [<00000000e7c7703d>] __kmalloc_track_caller+0x1ae/0x320 [<000000005e4d70bc>] kstrdup+0x3a/0x70 [<00000000c2e5e85a>] kstrdup_const+0x68/0x80 [<000000000049a8c7>] kvasprintf_const+0x10b/0x190 [<0000000029123163>] kobject_set_name_vargs+0x56/0x150 [<00000000747219c9>] kobject_set_name+0xab/0xe0 [<0000000005f1ea4e>] __class_register+0x15c/0x49a unreferenced object 0xffff888037274000 (size 1024): comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s) hex dump (first 32 bytes): 00 40 27 37 80 88 ff ff 00 40 27 37 80 88 ff ff .@'7.....@'7.... 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<00000000151f9600>] kmem_cache_alloc_trace+0x17c/0x2f0 [<00000000ecf3dd95>] __class_register+0x86/0x49a | ||||
| CVE-2023-53715 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to the device. | ||||
| CVE-2023-53724 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() `req` is allocated in pcf50633_adc_async_read(), but adc_enqueue_request() could fail to insert the `req` into queue. We need to check the return value and free it in the case of failure. | ||||