Total
33315 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-22076 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix missing shutdown check xfstests generic/730 test failed because after deleting the device that still had dirty data, the file could still be read without returning an error. The reason is the missing shutdown check in ->read_iter. I also noticed that shutdown checks were missing from ->write_iter, ->splice_read, and ->mmap. This commit adds shutdown checks to all of them. | ||||
| CVE-2025-22078 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Fix possible NPR of keep-alive thread In case vchiq_platform_conn_state_changed() is never called or fails before driver removal, ka_thread won't be a valid pointer to a task_struct. So do the necessary checks before calling kthread_stop to avoid a crash. | ||||
| CVE-2025-22064 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't unregister hook when table is dormant When nf_tables_updchain encounters an error, hook registration needs to be rolled back. This should only be done if the hook has been registered, which won't happen when the table is flagged as dormant (inactive). Just move the assignment into the registration block. | ||||
| CVE-2025-22046 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Harden uretprobe syscall trampoline check Jann reported a possible issue when trampoline_check_ip returns address near the bottom of the address space that is allowed to call into the syscall if uretprobes are not set up: https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf Though the mmap minimum address restrictions will typically prevent creating mappings there, let's make sure uretprobe syscall checks for that. | ||||
| CVE-2025-22047 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/microcode/AMD: Fix __apply_microcode_amd()'s return value When verify_sha256_digest() fails, __apply_microcode_amd() should propagate the failure by returning false (and not -1 which is promoted to true). | ||||
| CVE-2025-22048 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Don't override subprog's return value The verifier test `calls: div by 0 in subprog` triggers a panic at the ld.bu instruction. The ld.bu insn is trying to load byte from memory address returned by the subprog. The subprog actually set the correct address at the a5 register (dedicated register for BPF return values). But at commit 73c359d1d356 ("LoongArch: BPF: Sign-extend return values") we also sign extended a5 to the a0 register (return value in LoongArch). For function call insn, we later propagate the a0 register back to a5 register. This is right for native calls but wrong for bpf2bpf calls which expect zero-extended return value in a5 register. So only move a0 to a5 for native calls (i.e. non-BPF_PSEUDO_CALL). | ||||
| CVE-2025-22057 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: decrease cached dst counters in dst_release Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") moved decrementing the dst count from dst_destroy to dst_release to avoid accessing already freed data in case of netns dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels are used, this fix is incomplete as the same issue will be seen for cached dsts: Unable to handle kernel paging request at virtual address ffff5aabf6b5c000 Call trace: percpu_counter_add_batch+0x3c/0x160 (P) dst_release+0xec/0x108 dst_cache_destroy+0x68/0xd8 dst_destroy+0x13c/0x168 dst_destroy_rcu+0x1c/0xb0 rcu_do_batch+0x18c/0x7d0 rcu_core+0x174/0x378 rcu_core_si+0x18/0x30 Fix this by invalidating the cache, and thus decrementing cached dst counters, in dst_release too. | ||||
| CVE-2025-22034 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: reject FOLL_SPLIT_PMD with hugetlb VMAs Patch series "mm: fixes for device-exclusive entries (hmm)", v2. Discussing the PageTail() call in make_device_exclusive_range() with Willy, I recently discovered [1] that device-exclusive handling does not properly work with THP, making the hmm-tests selftests fail if THPs are enabled on the system. Looking into more details, I found that hugetlb is not properly fenced, and I realized that something that was bugging me for longer -- how device-exclusive entries interact with mapcounts -- completely breaks migration/swapout/split/hwpoison handling of these folios while they have device-exclusive PTEs. The program below can be used to allocate 1 GiB worth of pages and making them device-exclusive on a kernel with CONFIG_TEST_HMM. Once they are device-exclusive, these folios cannot get swapped out (proc$pid/smaps_rollup will always indicate 1 GiB RSS no matter how much one forces memory reclaim), and when having a memory block onlined to ZONE_MOVABLE, trying to offline it will loop forever and complain about failed migration of a page that should be movable. # echo offline > /sys/devices/system/memory/memory136/state # echo online_movable > /sys/devices/system/memory/memory136/state # ./hmm-swap & ... wait until everything is device-exclusive # echo offline > /sys/devices/system/memory/memory136/state [ 285.193431][T14882] page: refcount:2 mapcount:0 mapping:0000000000000000 index:0x7f20671f7 pfn:0x442b6a [ 285.196618][T14882] memcg:ffff888179298000 [ 285.198085][T14882] anon flags: 0x5fff0000002091c(referenced|uptodate| dirty|active|owner_2|swapbacked|node=1|zone=3|lastcpupid=0x7ff) [ 285.201734][T14882] raw: ... [ 285.204464][T14882] raw: ... [ 285.207196][T14882] page dumped because: migration failure [ 285.209072][T14882] page_owner tracks the page as allocated [ 285.210915][T14882] page last allocated via order 0, migratetype Movable, gfp_mask 0x140dca(GFP_HIGHUSER_MOVABLE|__GFP_COMP|__GFP_ZERO), id 14926, tgid 14926 (hmm-swap), ts 254506295376, free_ts 227402023774 [ 285.216765][T14882] post_alloc_hook+0x197/0x1b0 [ 285.218874][T14882] get_page_from_freelist+0x76e/0x3280 [ 285.220864][T14882] __alloc_frozen_pages_noprof+0x38e/0x2740 [ 285.223302][T14882] alloc_pages_mpol+0x1fc/0x540 [ 285.225130][T14882] folio_alloc_mpol_noprof+0x36/0x340 [ 285.227222][T14882] vma_alloc_folio_noprof+0xee/0x1a0 [ 285.229074][T14882] __handle_mm_fault+0x2b38/0x56a0 [ 285.230822][T14882] handle_mm_fault+0x368/0x9f0 ... This series fixes all issues I found so far. There is no easy way to fix without a bigger rework/cleanup. I have a bunch of cleanups on top (some previous sent, some the result of the discussion in v1) that I will send out separately once this landed and I get to it. I wish we could just use some special present PROT_NONE PTEs instead of these (non-present, non-none) fake-swap entries; but that just results in the same problem we keep having (lack of spare PTE bits), and staring at other similar fake-swap entries, that ship has sailed. With this series, make_device_exclusive() doesn't actually belong into mm/rmap.c anymore, but I'll leave moving that for another day. I only tested this series with the hmm-tests selftests due to lack of HW, so I'd appreciate some testing, especially if the interaction between two GPUs wanting a device-exclusive entry works as expected. <program> #include <stdio.h> #include <fcntl.h> #include <stdint.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <sys/mman.h> #include <sys/ioctl.h> #include <linux/types.h> #include <linux/ioctl.h> #define HMM_DMIRROR_EXCLUSIVE _IOWR('H', 0x05, struct hmm_dmirror_cmd) struct hmm_dmirror_cmd { __u64 addr; __u64 ptr; __u64 npages; __u64 cpages; __u64 faults; }; const size_t size = 1 * 1024 * 1024 * 1024ul; const size_t chunk_size = 2 * 1024 * 1024ul; int m ---truncated--- | ||||
| CVE-2025-41108 | 2 Ghost Robotics, Ghostrobotics | 3 Vision 60, Vision 60, Vision 60 Firmware | 2025-10-31 | 9.8 Critical |
| The communication protocol implemented in Ghost Robotics Vision 60 v0.27.2 could allow an attacker to send commands to the robot from an external attack station, impersonating the control station (tablet) and gaining unauthorised full control of the robot. The absence of encryption and authentication mechanisms in the communication protocol allows an attacker to capture legitimate traffic between the robot and the controller, replicate it, and send any valid command to the robot from any attacking computer or device. The communication protocol used in this interface is based on MAVLink, a widely documented protocol, which increases the likelihood of attack. There are two methods for connecting to the robot remotely: Wi-Fi and 4G/LTE. | ||||
| CVE-2025-21958 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "openvswitch: switch to per-action label counting in conntrack" Currently, ovs_ct_set_labels() is only called for confirmed conntrack entries (ct) within ovs_ct_commit(). However, if the conntrack entry does not have the labels_ext extension, attempting to allocate it in ovs_ct_get_conn_labels() for a confirmed entry triggers a warning in nf_ct_ext_add(): WARN_ON(nf_ct_is_confirmed(ct)); This happens when the conntrack entry is created externally before OVS increments net->ct.labels_used. The issue has become more likely since commit fcb1aa5163b1 ("openvswitch: switch to per-action label counting in conntrack"), which changed to use per-action label counting and increment net->ct.labels_used when a flow with ct action is added. Since there’s no straightforward way to fully resolve this issue at the moment, this reverts the commit to avoid breaking existing use cases. | ||||
| CVE-2025-41109 | 2 Ghost Robotics, Ghostrobotics | 3 Vision 60, Vision 60, Vision 60 Firmware | 2025-10-31 | 4.6 Medium |
| Ghost Robotics Vision 60 v0.27.2 includes, among its physical interfaces, three RJ45 connectors and a USB Type-C port. The vulnerability is due to the lack of authentication mechanisms when establishing connections through these ports. Specifically, with regard to network connectivity, the robot's internal router automatically assigns IP addresses to any device physically connected to it. An attacker could connect a WiFi access point under their control to gain access to the robot's network without needing the credentials for the deployed network. Once inside, the attacker can monitor all its data, as the robot runs on ROS 2 without authentication by default. | ||||
| CVE-2025-9240 | 2 Eladmin, Elunez | 2 Eladmin, Eladmin | 2025-10-31 | 4.3 Medium |
| A security flaw has been discovered in elunez eladmin up to 2.7. Affected by this issue is some unknown functionality of the file /auth/info. The manipulation results in information disclosure. The attack can be launched remotely. The exploit has been released to the public and may be exploited. | ||||
| CVE-2025-21974 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc() The bnxt_queue_mem_alloc() is called to allocate new queue memory when a queue is restarted. It internally accesses rx buffer descriptor corresponding to the index. The rx buffer descriptor is allocated and set when the interface is up and it's freed when the interface is down. So, if queue is restarted if interface is down, kernel panic occurs. Splat looks like: BUG: unable to handle page fault for address: 000000000000b240 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ #9 844ddba6e7c459cafd0bf4db9a3198e Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en] Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15 RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202 RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000 RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808 RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000 R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000 FS: 00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] ? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] netdev_rx_queue_restart+0xc5/0x240 net_devmem_bind_dmabuf_to_queue+0xf8/0x200 netdev_nl_bind_rx_doit+0x3a7/0x450 genl_family_rcv_msg_doit+0xd9/0x130 genl_rcv_msg+0x184/0x2b0 ? __pfx_netdev_nl_bind_rx_doit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 ... | ||||
| CVE-2024-58074 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Grab intel_display from the encoder to avoid potential oopsies Grab the intel_display from 'encoder' rather than 'state' in the encoder hooks to avoid the massive footgun that is intel_sanitize_encoder(), which passes NULL as the 'state' argument to encoder .disable() and .post_disable(). TODO: figure out how to actually fix intel_sanitize_encoder()... | ||||
| CVE-2025-21903 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mctp i3c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. | ||||
| CVE-2025-21902 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: acpi: typec: ucsi: Introduce a ->poll_cci method For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods. | ||||
| CVE-2025-21894 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNC Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash if VFs are used to test one-step timestamp, the crash log as follows. [ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0 [ 129.287769] Call trace: [ 129.290219] enetc_port_mac_wr+0x30/0xec (P) [ 129.294504] enetc_start_xmit+0xda4/0xe74 [ 129.298525] enetc_xmit+0x70/0xec [ 129.301848] dev_hard_start_xmit+0x98/0x118 | ||||
| CVE-2023-53033 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits If the offset + length goes over the ethernet + vlan header, then the length is adjusted to copy the bytes that are within the boundaries of the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet + vlan header are copied directly from the skbuff data area. Fix incorrect arithmetic operator: subtract, not add, the size of the vlan header in case of double-tagged packets to adjust the length accordingly to address CVE-2023-0179. | ||||
| CVE-2022-40139 | 2 Microsoft, Trendmicro | 2 Windows, Apex One | 2025-10-31 | 7.2 High |
| Improper validation of some components used by the rollback mechanism in Trend Micro Apex One and Trend Micro Apex One as a Service clients could allow a Apex One server administrator to instruct affected clients to download an unverified rollback package, which could lead to remote code execution. Please note: an attacker must first obtain Apex One server administration console access in order to exploit this vulnerability. | ||||
| CVE-2025-21955 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent connection release during oplock break notification ksmbd_work could be freed when after connection release. Increment r_count of ksmbd_conn to indicate that requests are not finished yet and to not release the connection. | ||||