Filtered by vendor Linux
Subscriptions
Total
15028 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-42130 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc/nci: Add the inconsistency check between the input data length and count write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf) Syzbot constructed a write() call with a data length of 3 bytes but a count value of 15, which passed too little data to meet the basic requirements of the function nci_rf_intf_activated_ntf_packet(). Therefore, increasing the comparison between data length and count value to avoid problems caused by inconsistent data length and count. | ||||
| CVE-2024-42127 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/lima: fix shared irq handling on driver remove lima uses a shared interrupt, so the interrupt handlers must be prepared to be called at any time. At driver removal time, the clocks are disabled early and the interrupts stay registered until the very end of the remove process due to the devm usage. This is potentially a bug as the interrupts access device registers which assumes clocks are enabled. A crash can be triggered by removing the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled. This patch frees the interrupts at each lima device finishing callback so that the handlers are already unregistered by the time we fully disable clocks. | ||||
| CVE-2024-42124 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Make qedf_execute_tmf() non-preemptible Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] | ||||
| CVE-2024-42115 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jffs2: Fix potential illegal address access in jffs2_free_inode During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once. | ||||
| CVE-2024-42114 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_fini ---truncated--- | ||||
| CVE-2024-42109 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally flush pending work before notifier syzbot reports: KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831 KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530 KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597 Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45 [..] Workqueue: events nf_tables_trans_destroy_work Call Trace: nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline] nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline] nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597 Problem is that the notifier does a conditional flush, but its possible that the table-to-be-removed is still referenced by transactions being processed by the worker, so we need to flush unconditionally. We could make the flush_work depend on whether we found a table to delete in nf-next to avoid the flush for most cases. AFAICS this problem is only exposed in nf-next, with commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"), with this commit applied there is an unconditional fetch of table->family which is whats triggering the above splat. | ||||
| CVE-2024-42106 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2 KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 | ||||
| CVE-2024-42103 | 1 Linux | 2 Linux, Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix adding block group to a reclaim list and the unused list during reclaim There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC. | ||||
| CVE-2024-42102 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" Patch series "mm: Avoid possible overflows in dirty throttling". Dirty throttling logic assumes dirty limits in page units fit into 32-bits. This patch series makes sure this is true (see patch 2/2 for more details). This patch (of 2): This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78. The commit is broken in several ways. Firstly, the removed (u64) cast from the multiplication will introduce a multiplication overflow on 32-bit archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the default settings with 4GB of RAM will trigger this). Secondly, the div64_u64() is unnecessarily expensive on 32-bit archs. We have div64_ul() in case we want to be safe & cheap. Thirdly, if dirty thresholds are larger than 1<<32 pages, then dirty balancing is going to blow up in many other spectacular ways anyway so trying to fix one possible overflow is just moot. | ||||
| CVE-2024-42101 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes In nouveau_connector_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. | ||||
| CVE-2024-42098 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ecdh - explicitly zeroize private_key private_key is overwritten with the key parameter passed in by the caller (if present), or alternatively a newly generated private key. However, it is possible that the caller provides a key (or the newly generated key) which is shorter than the previous key. In that scenario, some key material from the previous key would not be overwritten. The easiest solution is to explicitly zeroize the entire private_key array first. Note that this patch slightly changes the behavior of this function: previously, if the ecc_gen_privkey failed, the old private_key would remain. Now, the private_key is always zeroized. This behavior is consistent with the case where params.key is set and ecc_is_key_valid fails. | ||||
| CVE-2024-42097 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did. | ||||
| CVE-2024-42096 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86: stop playing stack games in profile_pc() The 'profile_pc()' function is used for timer-based profiling, which isn't really all that relevant any more to begin with, but it also ends up making assumptions based on the stack layout that aren't necessarily valid. Basically, the code tries to account the time spent in spinlocks to the caller rather than the spinlock, and while I support that as a concept, it's not worth the code complexity or the KASAN warnings when no serious profiling is done using timers anyway these days. And the code really does depend on stack layout that is only true in the simplest of cases. We've lost the comment at some point (I think when the 32-bit and 64-bit code was unified), but it used to say: Assume the lock function has either no stack frame or a copy of eflags from PUSHF. which explains why it just blindly loads a word or two straight off the stack pointer and then takes a minimal look at the values to just check if they might be eflags or the return pc: Eflags always has bits 22 and up cleared unlike kernel addresses but that basic stack layout assumption assumes that there isn't any lock debugging etc going on that would complicate the code and cause a stack frame. It causes KASAN unhappiness reported for years by syzkaller [1] and others [2]. With no real practical reason for this any more, just remove the code. Just for historical interest, here's some background commits relating to this code from 2006: 0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels") 31679f38d886 ("Simplify profile_pc on x86-64") and a code unification from 2009: ef4512882dbe ("x86: time_32/64.c unify profile_pc") but the basics of this thing actually goes back to before the git tree. | ||||
| CVE-2024-42093 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: net/dpaa2: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it. | ||||
| CVE-2024-42092 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: davinci: Validate the obtained number of IRQs Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken DT due to any error this value can be any. Without this value validation there can be out of chips->irqs array boundaries access in davinci_gpio_probe(). Validate the obtained nirq value so that it won't exceed the maximum number of IRQs per bank. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-42089 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl-asoc-card: set priv->pdev before using it priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due to compiler optimisations. | ||||
| CVE-2024-42087 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue. | ||||
| CVE-2024-42086 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: bme680: Fix overflows in compensate() functions There are cases in the compensate functions of the driver that there could be overflows of variables due to bit shifting ops. These implications were initially discussed here [1] and they were mentioned in log message of Commit 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor"). [1]: https://lore.kernel.org/linux-iio/20180728114028.3c1bbe81@archlinux/ | ||||
| CVE-2024-42084 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftruncate: pass a signed offset The old ftruncate() syscall, using the 32-bit off_t misses a sign extension when called in compat mode on 64-bit architectures. As a result, passing a negative length accidentally succeeds in truncating to file size between 2GiB and 4GiB. Changing the type of the compat syscall to the signed compat_off_t changes the behavior so it instead returns -EINVAL. The native entry point, the truncate() syscall and the corresponding loff_t based variants are all correct already and do not suffer from this mistake. | ||||
| CVE-2024-42080 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/restrack: Fix potential invalid address access struct rdma_restrack_entry's kern_name was set to KBUILD_MODNAME in ib_create_cq(), while if the module exited but forgot del this rdma_restrack_entry, it would cause a invalid address access in rdma_restrack_clean() when print the owner of this rdma_restrack_entry. These code is used to help find one forgotten PD release in one of the ULPs. But it is not needed anymore, so delete them. | ||||