Filtered by vendor Redhat
Subscriptions
Total
23052 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47412 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. | ||||
| CVE-2021-47408 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: serialize hash resizes and cleanups Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by ---truncated--- | ||||
| CVE-2021-47378 | 2 Linux, Redhat | 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more | 2025-12-10 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: destroy cm id before destroy qp to avoid use after free We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id. | ||||
| CVE-2021-47356 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-12-10 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible use-after-free in HFC_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | ||||
| CVE-2021-47353 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udf: Fix NULL pointer dereference in udf_symlink function In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh. | ||||
| CVE-2021-47352 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-12-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: Add validation for used length This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss. | ||||
| CVE-2021-47321 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-12-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | ||||
| CVE-2021-47289 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer. | ||||
| CVE-2021-47284 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: netjet: Fix crash in nj_probe: 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100 ---truncated--- | ||||
| CVE-2021-47257 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type. | ||||
| CVE-2021-47203 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local "fail_msg" string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since "fail_msg" remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure. | ||||
| CVE-2021-47185 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace: dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220 __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it. | ||||
| CVE-2024-30105 | 2 Microsoft, Redhat | 5 .net, Powershell, Visual Studio and 2 more | 2025-12-09 | 7.5 High |
| .NET and Visual Studio Denial of Service Vulnerability | ||||
| CVE-2024-38095 | 2 Microsoft, Redhat | 5 .net, Powershell, Visual Studio and 2 more | 2025-12-09 | 7.5 High |
| .NET and Visual Studio Denial of Service Vulnerability | ||||
| CVE-2024-35264 | 2 Microsoft, Redhat | 4 .net, Visual Studio, Visual Studio 2022 and 1 more | 2025-12-09 | 8.1 High |
| .NET and Visual Studio Remote Code Execution Vulnerability | ||||
| CVE-2025-59089 | 1 Redhat | 8 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 5 more | 2025-12-09 | 5.9 Medium |
| If an attacker causes kdcproxy to connect to an attacker-controlled KDC server (e.g. through server-side request forgery), they can exploit the fact that kdcproxy does not enforce bounds on TCP response length to conduct a denial-of-service attack. While receiving the KDC's response, kdcproxy copies the entire buffered stream into a new buffer on each recv() call, even when the transfer is incomplete, causing excessive memory allocation and CPU usage. Additionally, kdcproxy accepts incoming response chunks as long as the received data length is not exactly equal to the length indicated in the response header, even when individual chunks or the total buffer exceed the maximum length of a Kerberos message. This allows an attacker to send unbounded data until the connection timeout is reached (approximately 12 seconds), exhausting server memory or CPU resources. Multiple concurrent requests can cause accept queue overflow, denying service to legitimate clients. | ||||
| CVE-2025-59088 | 1 Redhat | 8 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 5 more | 2025-12-09 | 8.6 High |
| If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where the "use_dns" setting is explicitly set to false are not affected. | ||||
| CVE-2024-12125 | 1 Redhat | 1 Red Hat 3scale Amp | 2025-12-09 | 7.5 High |
| A flaw was found in the 3scale Developer Portal. When creating or updating an account in the Developer Portal UI it is possible to modify fields explicitly configured as read-only or hidden, allowing an attacker to modify restricted information. | ||||
| CVE-2024-3772 | 4 Fedoraproject, Pydantic, Pydantic Project and 1 more | 4 Fedora, Pydantic, Pydantic and 1 more | 2025-12-09 | 5.9 Medium |
| Regular expression denial of service in Pydanic < 2.4.0, < 1.10.13 allows remote attackers to cause denial of service via a crafted email string. | ||||
| CVE-2024-8176 | 1 Redhat | 10 Devworkspace, Discovery, Enterprise Linux and 7 more | 2025-12-09 | 7.5 High |
| A stack overflow vulnerability exists in the libexpat library due to the way it handles recursive entity expansion in XML documents. When parsing an XML document with deeply nested entity references, libexpat can be forced to recurse indefinitely, exhausting the stack space and causing a crash. This issue could lead to denial of service (DoS) or, in some cases, exploitable memory corruption, depending on the environment and library usage. | ||||