Total
33659 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52511 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: sun6i: reduce DMA RX transfer width to single byte Through empirical testing it has been determined that sometimes RX SPI transfers with DMA enabled return corrupted data. This is down to single or even multiple bytes lost during DMA transfer from SPI peripheral to memory. It seems the RX FIFO within the SPI peripheral can become confused when performing bus read accesses wider than a single byte to it during an active SPI transfer. This patch reduces the width of individual DMA read accesses to the RX FIFO to a single byte to mitigate that issue. | ||||
| CVE-2023-52499 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/47x: Fix 47x syscall return crash Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP: b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400 Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR: 00000030 <IR,DR> CR: 00001000 XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles. | ||||
| CVE-2023-52488 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO The SC16IS7XX IC supports a burst mode to access the FIFOs where the initial register address is sent ($00), followed by all the FIFO data without having to resend the register address each time. In this mode, the IC doesn't increment the register address for each R/W byte. The regmap_raw_read() and regmap_raw_write() are functions which can perform IO over multiple registers. They are currently used to read/write from/to the FIFO, and although they operate correctly in this burst mode on the SPI bus, they would corrupt the regmap cache if it was not disabled manually. The reason is that when the R/W size is more than 1 byte, these functions assume that the register address is incremented and handle the cache accordingly. Convert FIFO R/W functions to use the regmap _noinc_ versions in order to remove the manual cache control which was a workaround when using the _raw_ versions. FIFO registers are properly declared as volatile so cache will not be used/updated for FIFO accesses. | ||||
| CVE-2023-52481 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add Cortex-A520 speculative unprivileged load workaround Implement the workaround for ARM Cortex-A520 erratum 2966298. On an affected Cortex-A520 core, a speculatively executed unprivileged load might leak data from a privileged load via a cache side channel. The issue only exists for loads within a translation regime with the same translation (e.g. same ASID and VMID). Therefore, the issue only affects the return to EL0. The workaround is to execute a TLBI before returning to EL0 after all loads of privileged data. A non-shareable TLBI to any address is sufficient. The workaround isn't necessary if page table isolation (KPTI) is enabled, but for simplicity it will be. Page table isolation should normally be disabled for Cortex-A520 as it supports the CSV3 feature and the E0PD feature (used when KASLR is enabled). | ||||
| CVE-2023-52476 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/lbr: Filter vsyscall addresses We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. | ||||
| CVE-2023-52474 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a Here are the specific bugs: 1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec->iov.iov_len and are thus not intended to be in the packet. 2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request->iovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages. This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request. Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well. Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit: 1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings. 2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node. If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail. The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between (2) and (3). 3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler->lock and checks mmu_rb_node->refcount before mmu_rb_node->refcount is incremented. 4. Related to #2 above, SDMA request submission failure path does not check mmu_rb_node->refcount before freeing mmu_rb_node object. If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete. | ||||
| CVE-2023-52462 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix check for attempt to corrupt spilled pointer When register is spilled onto a stack as a 1/2/4-byte register, we set slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it, depending on actual spill size). So to check if some stack slot has spilled register we need to consult slot_type[7], not slot_type[0]. To avoid the need to remember and double-check this in the future, just use is_spilled_reg() helper. | ||||
| CVE-2023-52461 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix bounds limiting when given a malformed entity If we're given a malformed entity in drm_sched_entity_init()--shouldn't happen, but we verify--with out-of-bounds priority value, we set it to an allowed value. Fix the expression which sets this limit. | ||||
| CVE-2023-52455 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Don't reserve 0-length IOVA region When the bootloader/firmware doesn't setup the framebuffers, their address and size are 0 in "iommu-addresses" property. If IOVA region is reserved with 0 length, then it ends up corrupting the IOVA rbtree with an entry which has pfn_hi < pfn_lo. If we intend to use display driver in kernel without framebuffer then it's causing the display IOMMU mappings to fail as entire valid IOVA space is reserved when address and length are passed as 0. An ideal solution would be firmware removing the "iommu-addresses" property and corresponding "memory-region" if display is not present. But the kernel should be able to handle this by checking for size of IOVA region and skipping the IOVA reservation if size is 0. Also, add a warning if firmware is requesting 0-length IOVA region reservation. | ||||
| CVE-2025-21860 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: mm/zswap: fix inconsistency when zswap_store_page() fails Commit b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()") skips charging any zswap entries when it failed to zswap the entire folio. However, when some base pages are zswapped but it failed to zswap the entire folio, the zswap operation is rolled back. When freeing zswap entries for those pages, zswap_entry_free() uncharges the zswap entries that were not previously charged, causing zswap charging to become inconsistent. This inconsistency triggers two warnings with following steps: # On a machine with 64GiB of RAM and 36GiB of zswap $ stress-ng --bigheap 2 # wait until the OOM-killer kills stress-ng $ sudo reboot The two warnings are: in mm/memcontrol.c:163, function obj_cgroup_release(): WARN_ON_ONCE(nr_bytes & (PAGE_SIZE - 1)); in mm/page_counter.c:60, function page_counter_cancel(): if (WARN_ONCE(new < 0, "page_counter underflow: %ld nr_pages=%lu\n", new, nr_pages)) zswap_stored_pages also becomes inconsistent in the same way. As suggested by Kanchana, increment zswap_stored_pages and charge zswap entries within zswap_store_page() when it succeeds. This way, zswap_entry_free() will decrement the counter and uncharge the entries when it failed to zswap the entire folio. While this could potentially be optimized by batching objcg charging and incrementing the counter, let's focus on fixing the bug this time and leave the optimization for later after some evaluation. After resolving the inconsistency, the warnings disappear. [42.hyeyoo@gmail.com: refactor zswap_store_page()] | ||||
| CVE-2021-47613 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: fix completion handling The driver currently assumes that the notify callback is only received when the device is done with all the queued buffers. However, this is not true, since the notify callback could be called without any of the queued buffers being completed (for example, with virtio-pci and shared interrupts) or with only some of the buffers being completed (since the driver makes them available to the device in multiple separate virtqueue_add_sgs() calls). This can lead to incorrect data on the I2C bus or memory corruption in the guest if the device operates on buffers which are have been freed by the driver. (The WARN_ON in the driver is also triggered.) BUG kmalloc-128 (Tainted: G W ): Poison overwritten First byte 0x0 instead of 0x6b Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28 memdup_user+0x2e/0xbd i2cdev_ioctl_rdwr+0x9d/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28 kfree+0x1bd/0x1cc i2cdev_ioctl_rdwr+0x1bb/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Fix this by calling virtio_get_buf() from the notify handler like other virtio drivers and by actually waiting for all the buffers to be completed. | ||||
| CVE-2021-47611 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: validate extended element ID is present Before attempting to parse an extended element, verify that the extended element ID is present. | ||||
| CVE-2021-47608 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kernel address leakage in atomic fetch The change in commit 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since this would allow for unprivileged users to leak kernel pointers. For example, an atomic fetch/and with -1 on a stack destination which holds a spilled pointer will migrate the spilled register type into a scalar, which can then be exported out of the program (since scalar != pointer) by dumping it into a map value. The original implementation of XADD was preventing this situation by using a double call to check_mem_access() one with BPF_READ and a subsequent one with BPF_WRITE, in both cases passing -1 as a placeholder value instead of register as per XADD semantics since it didn't contain a value fetch. The BPF_READ also included a check in check_stack_read_fixed_off() which rejects the program if the stack slot is of __is_pointer_value() if dst_regno < 0. The latter is to distinguish whether we're dealing with a regular stack spill/ fill or some arithmetical operation which is disallowed on non-scalars, see also 6e7e63cbb023 ("bpf: Forbid XADD on spilled pointers for unprivileged users") for more context on check_mem_access() and its handling of placeholder value -1. One minimally intrusive option to fix the leak is for the BPF_FETCH case to initially check the BPF_READ case via check_mem_access() with -1 as register, followed by the actual load case with non-negative load_reg to propagate stack bounds to registers. | ||||
| CVE-2021-47607 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg The implementation of BPF_CMPXCHG on a high level has the following parameters: .-[old-val] .-[new-val] BPF_R0 = cmpxchg{32,64}(DST_REG + insn->off, BPF_R0, SRC_REG) `-[mem-loc] `-[old-val] Given a BPF insn can only have two registers (dst, src), the R0 is fixed and used as an auxilliary register for input (old value) as well as output (returning old value from memory location). While the verifier performs a number of safety checks, it misses to reject unprivileged programs where R0 contains a pointer as old value. Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the guessed address into the map slot as a scalar, and using the map value pointer as R0 while SRC_REG has a canary value to detect a matching address. Fix it by checking R0 for pointers, and reject if that's the case for unprivileged programs. | ||||
| CVE-2021-47595 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't remove idle classes from the round-robin list Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000 ---truncated--- | ||||
| CVE-2021-47512 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: prevent dismantle issue For some reason, fq_pie_destroy() did not copy working code from pie_destroy() and other qdiscs, thus causing elusive bug. Before calling del_timer_sync(&q->adapt_timer), we need to ensure timer will not rearm itself. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579 (t=10501 jiffies g=13085 q=3989) NMI backtrace for cpu 0 CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:627 [inline] check_cpu_stall kernel/rcu/tree_stall.h:711 [inline] rcu_pending kernel/rcu/tree.c:3878 [inline] rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:write_comp_data kernel/kcov.c:221 [inline] RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273 Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00 RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000 RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003 RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000 pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418 fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> | ||||
| CVE-2021-47272 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL There exists a possible scenario in which dwc3_gadget_init() can fail: during during host -> peripheral mode switch in dwc3_set_mode(), and a pending gadget driver fails to bind. Then, if the DRD undergoes another mode switch from peripheral->host the resulting dwc3_gadget_exit() will attempt to reference an invalid and dangling dwc->gadget pointer as well as call dma_free_coherent() on unmapped DMA pointers. The exact scenario can be reproduced as follows: - Start DWC3 in peripheral mode - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs) - Run FunctionFS userspace application (open EPs, write descriptors, etc) - Bind gadget driver to DWC3's UDC - Switch DWC3 to host mode => dwc3_gadget_exit() is called. usb_del_gadget() will put the ConfigFS driver instance on the gadget_driver_pending_list - Stop FunctionFS application (closes the ep files) - Switch DWC3 to peripheral mode => dwc3_gadget_init() fails as usb_add_gadget() calls check_pending_gadget_drivers() and attempts to rebind the UDC to the ConfigFS gadget but fails with -19 (-ENODEV) because the FFS instance is not in FFS_ACTIVE state (userspace has not re-opened and written the descriptors yet, i.e. desc_ready!=0). - Switch DWC3 back to host mode => dwc3_gadget_exit() is called again, but this time dwc->gadget is invalid. Although it can be argued that userspace should take responsibility for ensuring that the FunctionFS application be ready prior to allowing the composite driver bind to the UDC, failure to do so should not result in a panic from the kernel driver. Fix this by setting dwc->gadget to NULL in the failure path of dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out unless the gadget pointer is valid. | ||||
| CVE-2021-47268 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 1 ---truncated--- | ||||
| CVE-2021-47265 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA: Verify port when creating flow rule Validate port value provided by the user and with that remove no longer needed validation by the driver. The missing check in the mlx5_ib driver could cause to the below oops. Call trace: _create_flow_rule+0x2d4/0xf28 [mlx5_ib] mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib] ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs] ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs] ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs] do_vfs_ioctl+0xd0/0xaf0 ksys_ioctl+0x84/0xb4 __arm64_sys_ioctl+0x28/0xc4 el0_svc_common.constprop.3+0xa4/0x254 el0_svc_handler+0x84/0xa0 el0_svc+0x10/0x26c Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a) | ||||
| CVE-2021-47262 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message Use the __string() machinery provided by the tracing subystem to make a copy of the string literals consumed by the "nested VM-Enter failed" tracepoint. A complete copy is necessary to ensure that the tracepoint can't outlive the data/memory it consumes and deference stale memory. Because the tracepoint itself is defined by kvm, if kvm-intel and/or kvm-amd are built as modules, the memory holding the string literals defined by the vendor modules will be freed when the module is unloaded, whereas the tracepoint and its data in the ring buffer will live until kvm is unloaded (or "indefinitely" if kvm is built-in). This bug has existed since the tracepoint was added, but was recently exposed by a new check in tracing to detect exactly this type of bug. fmt: '%s%s ' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: ' WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0 CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:trace_check_vprintf+0x3be/0x3e0 Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20 RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8 RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4 R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000 FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0 Call Trace: trace_event_printf+0x5e/0x80 trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm] print_trace_line+0x1dd/0x4e0 s_show+0x45/0x150 seq_read_iter+0x2d5/0x4c0 seq_read+0x106/0x150 vfs_read+0x98/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||