Total
33184 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49624 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atlantic: remove aq_nic_deinit() when resume aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110 | ||||
| CVE-2022-49617 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: handle errors on card registration If the card registration fails, typically because of deferred probes, the device properties added for headset codecs are not removed, which leads to kernel oopses in driver bind/unbind tests. We already clean-up the device properties when the card is removed, this code can be moved as a helper and called upon card registration errors. | ||||
| CVE-2022-49613 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix PM usage_count for console handover When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). | ||||
| CVE-2022-49611 | 2 Linux, Redhat | 2 Linux Kernel, Rhel Eus | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/speculation: Fill RSB on vmexit for IBRS Prevent RSB underflow/poisoning attacks with RSB. While at it, add a bunch of comments to attempt to document the current state of tribal knowledge about RSB attacks and what exactly is being mitigated. | ||||
| CVE-2022-49610 | 1 Linux | 1 Linux Kernel | 2025-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Prevent RSB underflow before vmenter On VMX, there are some balanced returns between the time the guest's SPEC_CTRL value is written, and the vmenter. Balanced returns (matched by a preceding call) are usually ok, but it's at least theoretically possible an NMI with a deep call stack could empty the RSB before one of the returns. For maximum paranoia, don't allow *any* returns (balanced or otherwise) between the SPEC_CTRL write and the vmenter. [ bp: Fix 32-bit build. ] | ||||
| CVE-2024-20767 | 1 Adobe | 1 Coldfusion | 2025-10-23 | 7.4 High |
| ColdFusion versions 2023.6, 2021.12 and earlier are affected by an Improper Access Control vulnerability that could result in arbitrary file system read. An attacker could leverage this vulnerability to access or modify restricted files. Exploitation of this issue does not require user interaction. Exploitation of this issue requires the admin panel be exposed to the internet. | ||||
| CVE-2024-6436 | 1 Rockwellautomation | 1 Sequencemanager | 2025-10-22 | 6.5 Medium |
| An input validation vulnerability exists in the Rockwell Automation Sequence Manager™ which could allow a malicious user to send malformed packets to the server and cause a denial-of-service condition. If exploited, the device would become unresponsive, and a manual restart will be required for recovery. Additionally, if exploited, there could be a loss of view for the downstream equipment sequences in the controller. Users would not be able to view the status or command the equipment sequences, however the equipment sequence would continue to execute uninterrupted. | ||||
| CVE-2024-58016 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: safesetid: check size of policy writes syzbot attempts to write a buffer with a large size to a sysfs entry with writes handled by handle_policy_update(), triggering a warning in kmalloc. Check the size specified for write buffers before allocating. [PM: subject tweak] | ||||
| CVE-2024-58018 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvkm: correctly calculate the available space of the GSP cmdq buffer r535_gsp_cmdq_push() waits for the available page in the GSP cmdq buffer when handling a large RPC request. When it sees at least one available page in the cmdq, it quits the waiting with the amount of free buffer pages in the queue. Unfortunately, it always takes the [write pointer, buf_size) as available buffer pages before rolling back and wrongly calculates the size of the data should be copied. Thus, it can overwrite the RPC request that GSP is currently reading, which causes GSP hang due to corrupted RPC request: [ 549.209389] ------------[ cut here ]------------ [ 549.214010] WARNING: CPU: 8 PID: 6314 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:116 r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.225678] Modules linked in: nvkm(E+) gsp_log(E) snd_seq_dummy(E) snd_hrtimer(E) snd_seq(E) snd_timer(E) snd_seq_device(E) snd(E) soundcore(E) rfkill(E) qrtr(E) vfat(E) fat(E) ipmi_ssif(E) amd_atl(E) intel_rapl_msr(E) intel_rapl_common(E) mlx5_ib(E) amd64_edac(E) edac_mce_amd(E) kvm_amd(E) ib_uverbs(E) kvm(E) ib_core(E) acpi_ipmi(E) ipmi_si(E) mxm_wmi(E) ipmi_devintf(E) rapl(E) i2c_piix4(E) wmi_bmof(E) joydev(E) ptdma(E) acpi_cpufreq(E) k10temp(E) pcspkr(E) ipmi_msghandler(E) xfs(E) libcrc32c(E) ast(E) i2c_algo_bit(E) crct10dif_pclmul(E) drm_shmem_helper(E) nvme_tcp(E) crc32_pclmul(E) ahci(E) drm_kms_helper(E) libahci(E) nvme_fabrics(E) crc32c_intel(E) nvme(E) cdc_ether(E) mlx5_core(E) nvme_core(E) usbnet(E) drm(E) libata(E) ccp(E) ghash_clmulni_intel(E) mii(E) t10_pi(E) mlxfw(E) sp5100_tco(E) psample(E) pci_hyperv_intf(E) wmi(E) dm_multipath(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) be2iscsi(E) bnx2i(E) cnic(E) uio(E) cxgb4i(E) cxgb4(E) tls(E) libcxgbi(E) libcxgb(E) qla4xxx(E) [ 549.225752] iscsi_boot_sysfs(E) iscsi_tcp(E) libiscsi_tcp(E) libiscsi(E) scsi_transport_iscsi(E) fuse(E) [last unloaded: gsp_log(E)] [ 549.326293] CPU: 8 PID: 6314 Comm: insmod Tainted: G E 6.9.0-rc6+ #1 [ 549.334039] Hardware name: ASRockRack 1U1G-MILAN/N/ROMED8-NL, BIOS L3.12E 09/06/2022 [ 549.341781] RIP: 0010:r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.347343] Code: 08 00 00 89 da c1 e2 0c 48 8d ac 11 00 10 00 00 48 8b 0c 24 48 85 c9 74 1f c1 e0 0c 4c 8d 6d 30 83 e8 30 89 01 e9 68 ff ff ff <0f> 0b 49 c7 c5 92 ff ff ff e9 5a ff ff ff ba ff ff ff ff be c0 0c [ 549.366090] RSP: 0018:ffffacbccaaeb7d0 EFLAGS: 00010246 [ 549.371315] RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000923e28 [ 549.378451] RDX: 0000000000000000 RSI: 0000000055555554 RDI: ffffacbccaaeb730 [ 549.385590] RBP: 0000000000000001 R08: ffff8bd14d235f70 R09: ffff8bd14d235f70 [ 549.392721] R10: 0000000000000002 R11: ffff8bd14d233864 R12: 0000000000000020 [ 549.399854] R13: ffffacbccaaeb818 R14: 0000000000000020 R15: ffff8bb298c67000 [ 549.406988] FS: 00007f5179244740(0000) GS:ffff8bd14d200000(0000) knlGS:0000000000000000 [ 549.415076] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.420829] CR2: 00007fa844000010 CR3: 00000001567dc005 CR4: 0000000000770ef0 [ 549.427963] PKRU: 55555554 [ 549.430672] Call Trace: [ 549.433126] <TASK> [ 549.435233] ? __warn+0x7f/0x130 [ 549.438473] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.443426] ? report_bug+0x18a/0x1a0 [ 549.447098] ? handle_bug+0x3c/0x70 [ 549.450589] ? exc_invalid_op+0x14/0x70 [ 549.454430] ? asm_exc_invalid_op+0x16/0x20 [ 549.458619] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.463565] r535_gsp_msg_recv+0x46/0x230 [nvkm] [ 549.468257] r535_gsp_rpc_push+0x106/0x160 [nvkm] [ 549.473033] r535_gsp_rpc_rm_ctrl_push+0x40/0x130 [nvkm] [ 549.478422] nvidia_grid_init_vgpu_types+0xbc/0xe0 [nvkm] [ 549.483899] nvidia_grid_init+0xb1/0xd0 [nvkm] [ 549.488420] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.493213] nvkm_device_pci_probe+0x305/0x420 [nvkm] [ 549.498338] local_pci_probe+0x46/ ---truncated--- | ||||
| CVE-2022-49565 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/lbr: Fix unchecked MSR access error on HSW The fuzzer triggers the below trace. [ 7763.384369] unchecked MSR access error: WRMSR to 0x689 (tried to write 0x1fffffff8101349e) at rIP: 0xffffffff810704a4 (native_write_msr+0x4/0x20) [ 7763.397420] Call Trace: [ 7763.399881] <TASK> [ 7763.401994] intel_pmu_lbr_restore+0x9a/0x1f0 [ 7763.406363] intel_pmu_lbr_sched_task+0x91/0x1c0 [ 7763.410992] __perf_event_task_sched_in+0x1cd/0x240 On a machine with the LBR format LBR_FORMAT_EIP_FLAGS2, when the TSX is disabled, a TSX quirk is required to access LBR from registers. The lbr_from_signext_quirk_needed() is introduced to determine whether the TSX quirk should be applied. However, the lbr_from_signext_quirk_needed() is invoked before the intel_pmu_lbr_init(), which parses the LBR format information. Without the correct LBR format information, the TSX quirk never be applied. Move the lbr_from_signext_quirk_needed() into the intel_pmu_lbr_init(). Checking x86_pmu.lbr_has_tsx in the lbr_from_signext_quirk_needed() is not required anymore. Both LBR_FORMAT_EIP_FLAGS2 and LBR_FORMAT_INFO have LBR_TSX flag, but only the LBR_FORMAT_EIP_FLAGS2 requirs the quirk. Update the comments accordingly. | ||||
| CVE-2022-49562 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use __try_cmpxchg_user() to update guest PTE A/D bits Use the recently introduced __try_cmpxchg_user() to update guest PTE A/D bits instead of mapping the PTE into kernel address space. The VM_PFNMAP path is broken as it assumes that vm_pgoff is the base pfn of the mapped VMA range, which is conceptually wrong as vm_pgoff is the offset relative to the file and has nothing to do with the pfn. The horrific hack worked for the original use case (backing guest memory with /dev/mem), but leads to accessing "random" pfns for pretty much any other VM_PFNMAP case. | ||||
| CVE-2022-49555 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Use del_timer_sync() before freeing While looking at a crash report on a timer list being corrupted, which usually happens when a timer is freed while still active. This is commonly triggered by code calling del_timer() instead of del_timer_sync() just before freeing. One possible culprit is the hci_qca driver, which does exactly that. Eric mentioned that wake_retrans_timer could be rearmed via the work queue, so also move the destruction of the work queue before del_timer_sync(). | ||||
| CVE-2022-49659 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripheral devices was switched to RX-offload. Received CAN frames are pushed to RX-offload together with a timestamp. RX-offload is designed to handle overflows of the timestamp correctly, if 32 bit timestamps are provided. The timestamps of m_can core are only 16 bits wide. So this patch shifts them to full 32 bit before passing them to RX-offload. | ||||
| CVE-2022-49427 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Remove clk_disable in mtk_iommu_remove After the commit b34ea31fe013 ("iommu/mediatek: Always enable the clk on resume"), the iommu clock is controlled by the runtime callback. thus remove the clk control in the mtk_iommu_remove. Otherwise, it will warning like: echo 14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind [ 51.413044] ------------[ cut here ]------------ [ 51.413648] vpp0_smi_iommu already disabled [ 51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/ drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 51.417174] Hardware name: MT8195V/C(ENG) (DT) [ 51.418635] pc : clk_core_disable+0xb0/0xb8 [ 51.419177] lr : clk_core_disable+0xb0/0xb8 ... [ 51.429375] Call trace: [ 51.429694] clk_core_disable+0xb0/0xb8 [ 51.430193] clk_core_disable_lock+0x24/0x40 [ 51.430745] clk_disable+0x20/0x30 [ 51.431189] mtk_iommu_remove+0x58/0x118 [ 51.431705] platform_remove+0x28/0x60 [ 51.432197] device_release_driver_internal+0x110/0x1f0 [ 51.432873] device_driver_detach+0x18/0x28 [ 51.433418] unbind_store+0xd4/0x108 [ 51.433886] drv_attr_store+0x24/0x38 [ 51.434363] sysfs_kf_write+0x40/0x58 [ 51.434843] kernfs_fop_write_iter+0x164/0x1e0 | ||||
| CVE-2022-49430 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - cancel delayed work only in case of GPIO gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : __flush_work+0x414/0x470 [ 360.342385] lr : __cancel_work_timer+0x140/0x1b0 [ 360.347065] sp : ffff80000a7fba00 [ 360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000 [ 360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001 [ 360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000 [ 360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48 [ 360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40 [ 360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c [ 360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008 [ 360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080 [ 360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458 [ 360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000 [ 360.422818] Call trace: [ 360.425299] __flush_work+0x414/0x470 [ 360.429012] __cancel_work_timer+0x140/0x1b0 [ 360.433340] cancel_delayed_work_sync+0x10/0x18 [ 360.437931] gpio_keys_quiesce_key+0x28/0x58 [gpio_keys] [ 360.443327] devm_action_release+0x10/0x18 [ 360.447481] release_nodes+0x8c/0x1a0 [ 360.451194] devres_release_all+0x90/0x100 [ 360.455346] device_unbind_cleanup+0x14/0x60 [ 360.459677] device_release_driver_internal+0xe8/0x168 [ 360.464883] driver_detach+0x4c/0x90 [ 360.468509] bus_remove_driver+0x54/0xb0 [ 360.472485] driver_unregister+0x2c/0x58 [ 360.476462] platform_driver_unregister+0x10/0x18 [ 360.481230] gpio_keys_exit+0x14/0x828 [gpio_keys] [ 360.486088] __arm64_sys_delete_module+0x1e0/0x270 [ 360.490945] invoke_syscall+0x40/0xf8 [ 360.494661] el0_svc_common.constprop.3+0xf0/0x110 [ 360.499515] do_el0_svc+0x20/0x78 [ 360.502877] el0_svc+0x48/0xf8 [ 360.505977] el0t_64_sync_handler+0x88/0xb0 [ 360.510216] el0t_64_sync+0x148/0x14c [ 360.513930] irq event stamp: 4306 [ 360.517288] hardirqs last enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0 [ 360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88 [ 360.534204] softirqs last enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0 [ 360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0 [ 360.550591] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-49431 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Add missing of_node_put in iommu_init_early_dart The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak. | ||||
| CVE-2022-49558 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: double hook unregistration in netns path __nft_release_hooks() is called from pre_netns exit path which unregisters the hooks, then the NETDEV_UNREGISTER event is triggered which unregisters the hooks again. [ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270 [...] [ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27 [ 565.253682] Workqueue: netns cleanup_net [ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270 [...] [ 565.297120] Call Trace: [ 565.300900] <TASK> [ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables] [ 565.308518] raw_notifier_call_chain+0x63/0x80 [ 565.312386] unregister_netdevice_many+0x54f/0xb50 Unregister and destroy netdev hook from netns pre_exit via kfree_rcu so the NETDEV_UNREGISTER path see unregistered hooks. | ||||
| CVE-2022-49559 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Drop WARNs that assert a triple fault never "escapes" from L2 Remove WARNs that sanity check that KVM never lets a triple fault for L2 escape and incorrectly end up in L1. In normal operation, the sanity check is perfectly valid, but it incorrectly assumes that it's impossible for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through KVM_RUN (which guarantees kvm_check_nested_state() will see and handle the triple fault). The WARN can currently be triggered if userspace injects a machine check while L2 is active and CR4.MCE=0. And a future fix to allow save/restore of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't lost on migration, will make it trivially easy for userspace to trigger the WARN. Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is tempting, but wrong, especially if/when the request is saved/restored, e.g. if userspace restores events (including a triple fault) and then restores nested state (which may forcibly leave guest mode). Ignoring the fact that KVM doesn't currently provide the necessary APIs, it's userspace's responsibility to manage pending events during save/restore. ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Modules linked in: kvm_intel kvm irqbypass CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Call Trace: <TASK> vmx_leave_nested+0x30/0x40 [kvm_intel] vmx_set_nested_state+0xca/0x3e0 [kvm_intel] kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm] kvm_vcpu_ioctl+0x4b9/0x660 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-49440 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: Keep MSR[RI] set when calling RTAS RTAS runs in real mode (MSR[DR] and MSR[IR] unset) and in 32-bit big endian mode (MSR[SF,LE] unset). The change in MSR is done in enter_rtas() in a relatively complex way, since the MSR value could be hardcoded. Furthermore, a panic has been reported when hitting the watchdog interrupt while running in RTAS, this leads to the following stack trace: watchdog: CPU 24 Hard LOCKUP watchdog: CPU 24 TB:997512652051031, last heartbeat TB:997504470175378 (15980ms ago) ... Supported: No, Unreleased kernel CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c NIP: 000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000 REGS: c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default) MSR: 8000000002981000 <SF,VEC,VSX,ME> CR: 48800002 XER: 20040020 CFAR: 000000000000011c IRQMASK: 1 GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010 GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034 GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008 GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40 GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000 NIP [000000001fb41050] 0x1fb41050 LR [000000001fb4104c] 0x1fb4104c Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Oops: Unrecoverable System Reset, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ... Supported: No, Unreleased kernel CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c NIP: 000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000 REGS: c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default) MSR: 8000000002981000 <SF,VEC,VSX,ME> CR: 48800002 XER: 20040020 CFAR: 000000000000011c IRQMASK: 1 GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010 GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034 GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008 GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40 GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000 NIP [000000001fb41050] 0x1fb41050 LR [000000001fb4104c] 0x1fb4104c Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 3ddec07f638c34a2 ]--- This happens because MSR[RI] is unset when entering RTAS but there is no valid reason to not set it here. RTAS is expected to be called with MSR[RI] as specified in PAPR+ section "7.2.1 Machine State": R1–7.2.1–9. If called with MSR[RI] equal to 1, then RTAS must protect its own critical regions from recursion by setting the MSR[RI] bit to 0 when in the critical regions. Fixing this by reviewing the way MSR is compute before calling RTAS. Now a hardcoded value meaning real ---truncated--- | ||||
| CVE-2022-49456 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix missed rcu protection When removing the rcu_read_lock in bond_ethtool_get_ts_info() as discussed [1], I didn't notice it could be called via setsockopt, which doesn't hold rcu lock, as syzbot pointed: stack backtrace: CPU: 0 PID: 3599 Comm: syz-executor317 Not tainted 5.18.0-rc5-syzkaller-01392-g01f4685797a5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 bond_option_active_slave_get_rcu include/net/bonding.h:353 [inline] bond_ethtool_get_ts_info+0x32c/0x3a0 drivers/net/bonding/bond_main.c:5595 __ethtool_get_ts_info+0x173/0x240 net/ethtool/common.c:554 ethtool_get_phc_vclocks+0x99/0x110 net/ethtool/common.c:568 sock_timestamping_bind_phc net/core/sock.c:869 [inline] sock_set_timestamping+0x3a3/0x7e0 net/core/sock.c:916 sock_setsockopt+0x543/0x2ec0 net/core/sock.c:1221 __sys_setsockopt+0x55e/0x6a0 net/socket.c:2223 __do_sys_setsockopt net/socket.c:2238 [inline] __se_sys_setsockopt net/socket.c:2235 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2235 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8902c8eb39 Fix it by adding rcu_read_lock and take a ref on the real_dev. Since dev_hold() and dev_put() can take NULL these days, we can skip checking if real_dev exist. [1] https://lore.kernel.org/netdev/27565.1642742439@famine/ | ||||