Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16823 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50647 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: Make port I/O string accessors actually work Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8 [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>] ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work. | ||||
| CVE-2022-50648 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix recursive locking direct_mutex in ftrace_modify_direct_caller Naveen reported recursive locking of direct_mutex with sample ftrace-direct-modify.ko: [ 74.762406] WARNING: possible recursive locking detected [ 74.762887] 6.0.0-rc6+ #33 Not tainted [ 74.763216] -------------------------------------------- [ 74.763672] event-sample-fn/1084 is trying to acquire lock: [ 74.764152] ffffffff86c9d6b0 (direct_mutex){+.+.}-{3:3}, at: \ register_ftrace_function+0x1f/0x180 [ 74.764922] [ 74.764922] but task is already holding lock: [ 74.765421] ffffffff86c9d6b0 (direct_mutex){+.+.}-{3:3}, at: \ modify_ftrace_direct+0x34/0x1f0 [ 74.766142] [ 74.766142] other info that might help us debug this: [ 74.766701] Possible unsafe locking scenario: [ 74.766701] [ 74.767216] CPU0 [ 74.767437] ---- [ 74.767656] lock(direct_mutex); [ 74.767952] lock(direct_mutex); [ 74.768245] [ 74.768245] *** DEADLOCK *** [ 74.768245] [ 74.768750] May be due to missing lock nesting notation [ 74.768750] [ 74.769332] 1 lock held by event-sample-fn/1084: [ 74.769731] #0: ffffffff86c9d6b0 (direct_mutex){+.+.}-{3:3}, at: \ modify_ftrace_direct+0x34/0x1f0 [ 74.770496] [ 74.770496] stack backtrace: [ 74.770884] CPU: 4 PID: 1084 Comm: event-sample-fn Not tainted ... [ 74.771498] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 74.772474] Call Trace: [ 74.772696] <TASK> [ 74.772896] dump_stack_lvl+0x44/0x5b [ 74.773223] __lock_acquire.cold.74+0xac/0x2b7 [ 74.773616] lock_acquire+0xd2/0x310 [ 74.773936] ? register_ftrace_function+0x1f/0x180 [ 74.774357] ? lock_is_held_type+0xd8/0x130 [ 74.774744] ? my_tramp2+0x11/0x11 [ftrace_direct_modify] [ 74.775213] __mutex_lock+0x99/0x1010 [ 74.775536] ? register_ftrace_function+0x1f/0x180 [ 74.775954] ? slab_free_freelist_hook.isra.43+0x115/0x160 [ 74.776424] ? ftrace_set_hash+0x195/0x220 [ 74.776779] ? register_ftrace_function+0x1f/0x180 [ 74.777194] ? kfree+0x3e1/0x440 [ 74.777482] ? my_tramp2+0x11/0x11 [ftrace_direct_modify] [ 74.777941] ? __schedule+0xb40/0xb40 [ 74.778258] ? register_ftrace_function+0x1f/0x180 [ 74.778672] ? my_tramp1+0xf/0xf [ftrace_direct_modify] [ 74.779128] register_ftrace_function+0x1f/0x180 [ 74.779527] ? ftrace_set_filter_ip+0x33/0x70 [ 74.779910] ? __schedule+0xb40/0xb40 [ 74.780231] ? my_tramp1+0xf/0xf [ftrace_direct_modify] [ 74.780678] ? my_tramp2+0x11/0x11 [ftrace_direct_modify] [ 74.781147] ftrace_modify_direct_caller+0x5b/0x90 [ 74.781563] ? 0xffffffffa0201000 [ 74.781859] ? my_tramp1+0xf/0xf [ftrace_direct_modify] [ 74.782309] modify_ftrace_direct+0x1b2/0x1f0 [ 74.782690] ? __schedule+0xb40/0xb40 [ 74.783014] ? simple_thread+0x2a/0xb0 [ftrace_direct_modify] [ 74.783508] ? __schedule+0xb40/0xb40 [ 74.783832] ? my_tramp2+0x11/0x11 [ftrace_direct_modify] [ 74.784294] simple_thread+0x76/0xb0 [ftrace_direct_modify] [ 74.784766] kthread+0xf5/0x120 [ 74.785052] ? kthread_complete_and_exit+0x20/0x20 [ 74.785464] ret_from_fork+0x22/0x30 [ 74.785781] </TASK> Fix this by using register_ftrace_function_nolock in ftrace_modify_direct_caller. | ||||
| CVE-2022-50651 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: fix null-deref on genl_info in dump The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on genl_info in dump") is also needed for ethtool eeprom. | ||||
| CVE-2022-50653 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). So fix this by checking the return value and calling mmc_free_host() in the error path. | ||||
| CVE-2022-50654 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix panic due to wrong pageattr of im->image In the scenario where livepatch and kretfunc coexist, the pageattr of im->image is rox after arch_prepare_bpf_trampoline in bpf_trampoline_update, and then modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag will be configured, and arch_prepare_bpf_trampoline will be re-executed. At this time, because the pageattr of im->image is rox, arch_prepare_bpf_trampoline will read and write im->image, which causes a fault. as follows: insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c bpftrace -e 'kretfunc:cmdline_proc_show {}' BUG: unable to handle page fault for address: ffffffffa0206000 PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5 RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0 RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202 RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030 RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400 R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8 R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10 FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bpf_trampoline_update+0x25a/0x6b0 __bpf_trampoline_link_prog+0x101/0x240 bpf_trampoline_link_prog+0x2d/0x50 bpf_tracing_prog_attach+0x24c/0x530 bpf_raw_tp_link_attach+0x73/0x1d0 __sys_bpf+0x100e/0x2570 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x5b/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With this patch, when modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset to nx+rw. | ||||
| CVE-2022-50656 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Clear nfc_target before being used Fix a slab-out-of-bounds read that occurs in nla_put() called from nfc_genl_send_target() when target->sensb_res_len, which is duplicated from an nfc_target in pn533, is too large as the nfc_target is not properly initialized and retains garbage values. Clear nfc_targets with memset() before they are used. Found by a modified version of syzkaller. BUG: KASAN: slab-out-of-bounds in nla_put Call Trace: memcpy nla_put nfc_genl_dump_targets genl_lock_dumpit netlink_dump __netlink_dump_start genl_family_rcv_msg_dumpit genl_rcv_msg netlink_rcv_skb genl_rcv netlink_unicast netlink_sendmsg sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 | ||||
| CVE-2022-50658 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix memory leak in error path If for some reason the speedbin length is incorrect, then there is a memory leak in the error path because we never free the speedbin buffer. This commit fixes the error path to always free the speedbin buffer. | ||||
| CVE-2022-50659 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: geode - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. We add a new struct 'amd_geode_priv' to record pointer of the pci_dev and membase, and then add missing pci_dev_put() for the normal and error path. | ||||
| CVE-2022-50662 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: fix memory leak in hns_roce_alloc_mr() When hns_roce_mr_enable() failed in hns_roce_alloc_mr(), mr_key is not released. Compiled test only. | ||||
| CVE-2022-50665 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, "failed to find the peer with peer_id %d\n", ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and then the log "failed to find the peer with peer_id 0" print after the check in the loop, it is below call stack when debug_mask is set ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv") add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in ath11k_dp_rx_process_mon_status(), but the commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k] [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000 [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0 [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50 [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50 [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k] [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860] call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ? lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093] __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(), then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 | ||||
| CVE-2022-50666 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix QP destroy to wait for all references dropped. Delay QP destroy completion until all siw references to QP are dropped. The calling RDMA core will free QP structure after successful return from siw_qp_destroy() call, so siw must not hold any remaining reference to the QP upon return. A use-after-free was encountered in xfstest generic/460, while testing NFSoRDMA. Here, after a TCP connection drop by peer, the triggered siw_cm_work_handler got delayed until after QP destroy call, referencing a QP which has already freed. | ||||
| CVE-2022-50667 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl() If the copy of the description string from userspace fails, then the page for the instance descriptor doesn't get freed before returning -EFAULT, which leads to a memleak. | ||||
| CVE-2022-50668 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix deadlock due to mbcache entry corruption When manipulating xattr blocks, we can deadlock infinitely looping inside ext4_xattr_block_set() where we constantly keep finding xattr block for reuse in mbcache but we are unable to reuse it because its reference count is too big. This happens because cache entry for the xattr block is marked as reusable (e_reusable set) although its reference count is too big. When this inconsistency happens, this inconsistent state is kept indefinitely and so ext4_xattr_block_set() keeps retrying indefinitely. The inconsistent state is caused by non-atomic update of e_reusable bit. e_reusable is part of a bitfield and e_reusable update can race with update of e_referenced bit in the same bitfield resulting in loss of one of the updates. Fix the problem by using atomic bitops instead. This bug has been around for many years, but it became *much* easier to hit after commit 65f8b80053a1 ("ext4: fix race when reusing xattr blocks"). | ||||
| CVE-2022-50669 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible name leak in ocxl_file_register_afu() If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release(). | ||||
| CVE-2022-50670 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: omap_hsmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path wihch will call mmc_free_host(). | ||||
| CVE-2022-50671 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix "kernel NULL pointer dereference" error When rxe_queue_init in the function rxe_qp_init_req fails, both qp->req.task.func and qp->req.task.arg are not initialized. Because of creation of qp fails, the function rxe_create_qp will call rxe_qp_do_cleanup to handle allocated resource. Before calling __rxe_do_task, both qp->req.task.func and qp->req.task.arg should be checked. | ||||
| CVE-2022-50672 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynq-ipi: fix error handling while device_register() fails If device_register() fails, it has two issues: 1. The name allocated by dev_set_name() is leaked. 2. The parent of device is not NULL, device_unregister() is called in zynqmp_ipi_free_mboxes(), it will lead a kernel crash because of removing not added device. Call put_device() to give up the reference, so the name is freed in kobject_cleanup(). Add device registered check in zynqmp_ipi_free_mboxes() to avoid null-ptr-deref. | ||||
| CVE-2022-50674 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: vdso: fix NULL deference in vdso_join_timens() when vfork Testing tools/testing/selftests/timens/vfork_exec.c got below kernel log: [ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020 [ 6.842255] Oops [#1] [ 6.842871] Modules linked in: [ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8 [ 6.845861] Hardware name: riscv-virtio,qemu (DT) [ 6.848009] epc : vdso_join_timens+0xd2/0x110 [ 6.850097] ra : vdso_join_timens+0xd2/0x110 [ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0 [ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030 [ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40 [ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c [ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000 [ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000 [ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38 [ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e [ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f [ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00 [ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d [ 6.868046] [<ffffffff8008dc94>] timens_commit+0x38/0x11a [ 6.869089] [<ffffffff8008dde8>] timens_on_fork+0x72/0xb4 [ 6.870055] [<ffffffff80190096>] begin_new_exec+0x3c6/0x9f0 [ 6.871231] [<ffffffff801d826c>] load_elf_binary+0x628/0x1214 [ 6.872304] [<ffffffff8018ee7a>] bprm_execve+0x1f2/0x4e4 [ 6.873243] [<ffffffff8018f90c>] do_execveat_common+0x16e/0x1ee [ 6.874258] [<ffffffff8018f9c8>] sys_execve+0x3c/0x48 [ 6.875162] [<ffffffff80003556>] ret_from_syscall+0x0/0x2 [ 6.877484] ---[ end trace 0000000000000000 ]--- This is because the mm->context.vdso_info is NULL in vfork case. From another side, mm->context.vdso_info either points to vdso info for RV64 or vdso info for compat, there's no need to bloat riscv's mm_context_t, we can handle the difference when setup the additional page for vdso. | ||||
| CVE-2023-53865 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix warning when putting transaction with qgroups enabled after abort If we have a transaction abort with qgroups enabled we get a warning triggered when doing the final put on the transaction, like this: [552.6789] ------------[ cut here ]------------ [552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs] [552.6817] Modules linked in: btrfs blake2b_generic xor (...) [552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs] [552.6821] Code: bd a0 01 00 (...) [552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286 [552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000 [552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010 [552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20 [552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70 [552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028 [552.6821] FS: 0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000 [552.6821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0 [552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [552.6822] Call Trace: [552.6822] <TASK> [552.6822] ? __warn+0x80/0x130 [552.6822] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6824] ? report_bug+0x1f4/0x200 [552.6824] ? handle_bug+0x42/0x70 [552.6824] ? exc_invalid_op+0x14/0x70 [552.6824] ? asm_exc_invalid_op+0x16/0x20 [552.6824] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6826] btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs] [552.6828] ? _raw_spin_unlock_irqrestore+0x23/0x40 [552.6828] ? try_to_wake_up+0x94/0x5e0 [552.6828] ? __pfx_process_timeout+0x10/0x10 [552.6828] transaction_kthread+0x103/0x1d0 [btrfs] [552.6830] ? __pfx_transaction_kthread+0x10/0x10 [btrfs] [552.6832] kthread+0xee/0x120 [552.6832] ? __pfx_kthread+0x10/0x10 [552.6832] ret_from_fork+0x29/0x50 [552.6832] </TASK> [552.6832] ---[ end trace 0000000000000000 ]--- This corresponds to this line of code: void btrfs_put_transaction(struct btrfs_transaction *transaction) { (...) WARN_ON(!RB_EMPTY_ROOT( &transaction->delayed_refs.dirty_extent_root)); (...) } The warning happens because btrfs_qgroup_destroy_extent_records(), called in the transaction abort path, we free all entries from the rbtree "dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we don't actually empty the rbtree - it's still pointing to nodes that were freed. So set the rbtree's root node to NULL to avoid this warning (assign RB_ROOT). | ||||
| CVE-2023-53860 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: don't attempt to queue IO under RCU protection dm looks up the table for IO based on the request type, with an assumption that if the request is marked REQ_NOWAIT, it's fine to attempt to submit that IO while under RCU read lock protection. This is not OK, as REQ_NOWAIT just means that we should not be sleeping waiting on other IO, it does not mean that we can't potentially schedule. A simple test case demonstrates this quite nicely: int main(int argc, char *argv[]) { struct iovec iov; int fd; fd = open("/dev/dm-0", O_RDONLY | O_DIRECT); posix_memalign(&iov.iov_base, 4096, 4096); iov.iov_len = 4096; preadv2(fd, &iov, 1, 0, RWF_NOWAIT); return 0; } which will instantly spew: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 INFO: lockdep is turned off. CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x11d/0x1b0 __might_resched+0x3c3/0x5e0 ? preempt_count_sub+0x150/0x150 mempool_alloc+0x1e2/0x390 ? mempool_resize+0x7d0/0x7d0 ? lock_sync+0x190/0x190 ? lock_release+0x4b7/0x670 ? internal_get_user_pages_fast+0x868/0x2d40 bio_alloc_bioset+0x417/0x8c0 ? bvec_alloc+0x200/0x200 ? internal_get_user_pages_fast+0xb8c/0x2d40 bio_alloc_clone+0x53/0x100 dm_submit_bio+0x27f/0x1a20 ? lock_release+0x4b7/0x670 ? blk_try_enter_queue+0x1a0/0x4d0 ? dm_dax_direct_access+0x260/0x260 ? rcu_is_watching+0x12/0xb0 ? blk_try_enter_queue+0x1cc/0x4d0 __submit_bio+0x239/0x310 ? __bio_queue_enter+0x700/0x700 ? kvm_clock_get_cycles+0x40/0x60 ? ktime_get+0x285/0x470 submit_bio_noacct_nocheck+0x4d9/0xb80 ? should_fail_request+0x80/0x80 ? preempt_count_sub+0x150/0x150 ? lock_release+0x4b7/0x670 ? __bio_add_page+0x143/0x2d0 ? iov_iter_revert+0x27/0x360 submit_bio_noacct+0x53e/0x1b30 submit_bio_wait+0x10a/0x230 ? submit_bio_wait_endio+0x40/0x40 __blkdev_direct_IO_simple+0x4f8/0x780 ? blkdev_bio_end_io+0x4c0/0x4c0 ? stack_trace_save+0x90/0xc0 ? __bio_clone+0x3c0/0x3c0 ? lock_release+0x4b7/0x670 ? lock_sync+0x190/0x190 ? atime_needs_update+0x3bf/0x7e0 ? timestamp_truncate+0x21b/0x2d0 ? inode_owner_or_capable+0x240/0x240 blkdev_direct_IO.part.0+0x84a/0x1810 ? rcu_is_watching+0x12/0xb0 ? lock_release+0x4b7/0x670 ? blkdev_read_iter+0x40d/0x530 ? reacquire_held_locks+0x4e0/0x4e0 ? __blkdev_direct_IO_simple+0x780/0x780 ? rcu_is_watching+0x12/0xb0 ? __mark_inode_dirty+0x297/0xd50 ? preempt_count_add+0x72/0x140 blkdev_read_iter+0x2a4/0x530 do_iter_readv_writev+0x2f2/0x3c0 ? generic_copy_file_range+0x1d0/0x1d0 ? fsnotify_perm.part.0+0x25d/0x630 ? security_file_permission+0xd8/0x100 do_iter_read+0x31b/0x880 ? import_iovec+0x10b/0x140 vfs_readv+0x12d/0x1a0 ? vfs_iter_read+0xb0/0xb0 ? rcu_is_watching+0x12/0xb0 ? rcu_is_watching+0x12/0xb0 ? lock_release+0x4b7/0x670 do_preadv+0x1b3/0x260 ? do_readv+0x370/0x370 __x64_sys_preadv2+0xef/0x150 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5af41ad806 Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55 RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806 RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003 RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001 </TASK> where in fact it is ---truncated--- | ||||