Filtered by vendor Linux
Subscriptions
Total
16909 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53836 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix skb refcnt race after locking changes There is a race where skb's from the sk_psock_backlog can be referenced after userspace side has already skb_consumed() the sk_buff and its refcnt dropped to zer0 causing use after free. The flow is the following: while ((skb = skb_peek(&psock->ingress_skb)) sk_psock_handle_Skb(psock, skb, ..., ingress) if (!ingress) ... sk_psock_skb_ingress sk_psock_skb_ingress_enqueue(skb) msg->skb = skb sk_psock_queue_msg(psock, msg) skb_dequeue(&psock->ingress_skb) The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is what the application reads when recvmsg() is called. An application can read this anytime after the msg is placed on the queue. The recvmsg hook will also read msg->skb and then after user space reads the msg will call consume_skb(skb) on it effectively free'ing it. But, the race is in above where backlog queue still has a reference to the skb and calls skb_dequeue(). If the skb_dequeue happens after the user reads and free's the skb we have a use after free. The !ingress case does not suffer from this problem because it uses sendmsg_*(sk, msg) which does not pass the sk_buff further down the stack. The following splat was observed with 'test_progs -t sockmap_listen': [ 1022.710250][ T2556] general protection fault, ... [...] [ 1022.712830][ T2556] Workqueue: events sk_psock_backlog [ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80 [ 1022.713653][ T2556] Code: ... [...] [ 1022.720699][ T2556] Call Trace: [ 1022.720984][ T2556] <TASK> [ 1022.721254][ T2556] ? die_addr+0x32/0x80^M [ 1022.721589][ T2556] ? exc_general_protection+0x25a/0x4b0 [ 1022.722026][ T2556] ? asm_exc_general_protection+0x22/0x30 [ 1022.722489][ T2556] ? skb_dequeue+0x4c/0x80 [ 1022.722854][ T2556] sk_psock_backlog+0x27a/0x300 [ 1022.723243][ T2556] process_one_work+0x2a7/0x5b0 [ 1022.723633][ T2556] worker_thread+0x4f/0x3a0 [ 1022.723998][ T2556] ? __pfx_worker_thread+0x10/0x10 [ 1022.724386][ T2556] kthread+0xfd/0x130 [ 1022.724709][ T2556] ? __pfx_kthread+0x10/0x10 [ 1022.725066][ T2556] ret_from_fork+0x2d/0x50 [ 1022.725409][ T2556] ? __pfx_kthread+0x10/0x10 [ 1022.725799][ T2556] ret_from_fork_asm+0x1b/0x30 [ 1022.726201][ T2556] </TASK> To fix we add an skb_get() before passing the skb to be enqueued in the engress queue. This bumps the skb->users refcnt so that consume_skb() and kfree_skb will not immediately free the sk_buff. With this we can be sure the skb is still around when we do the dequeue. Then we just need to decrement the refcnt or free the skb in the backlog case which we do by calling kfree_skb() on the ingress case as well as the sendmsg case. Before locking change from fixes tag we had the sock locked so we couldn't race with user and there was no issue here. | ||||
| CVE-2023-53809 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() When a file descriptor of pppol2tp socket is passed as file descriptor of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register(). This situation is reproduced by the following program: int main(void) { int sock; struct sockaddr_pppol2tp addr; sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP); if (sock < 0) { perror("socket"); return 1; } addr.sa_family = AF_PPPOX; addr.sa_protocol = PX_PROTO_OL2TP; addr.pppol2tp.pid = 0; addr.pppol2tp.fd = sock; addr.pppol2tp.addr.sin_family = PF_INET; addr.pppol2tp.addr.sin_port = htons(0); addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1"); addr.pppol2tp.s_tunnel = 1; addr.pppol2tp.s_session = 0; addr.pppol2tp.d_tunnel = 0; addr.pppol2tp.d_session = 0; if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) { perror("connect"); return 1; } return 0; } This program causes the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.2.0-rc5-00205-gc96618275234 #56 Not tainted -------------------------------------------- repro/8607 is trying to acquire lock: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0 but task is already holding lock: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sk_lock-AF_PPPOX); lock(sk_lock-AF_PPPOX); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by repro/8607: #0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30 stack backtrace: CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x178 __lock_acquire.cold+0x119/0x3b9 ? lockdep_hardirqs_on_prepare+0x410/0x410 lock_acquire+0x1e0/0x610 ? l2tp_tunnel_register+0x2b7/0x11c0 ? lock_downgrade+0x710/0x710 ? __fget_files+0x283/0x3e0 lock_sock_nested+0x3a/0xf0 ? l2tp_tunnel_register+0x2b7/0x11c0 l2tp_tunnel_register+0x2b7/0x11c0 ? sprintf+0xc4/0x100 ? l2tp_tunnel_del_work+0x6b0/0x6b0 ? debug_object_deactivate+0x320/0x320 ? lockdep_init_map_type+0x16d/0x7a0 ? lockdep_init_map_type+0x16d/0x7a0 ? l2tp_tunnel_create+0x2bf/0x4b0 ? l2tp_tunnel_create+0x3c6/0x4b0 pppol2tp_connect+0x14e1/0x1a30 ? pppol2tp_put_sk+0xd0/0xd0 ? aa_sk_perm+0x2b7/0xa80 ? aa_af_perm+0x260/0x260 ? bpf_lsm_socket_connect+0x9/0x10 ? pppol2tp_put_sk+0xd0/0xd0 __sys_connect_file+0x14f/0x190 __sys_connect+0x133/0x160 ? __sys_connect_file+0x190/0x190 ? lockdep_hardirqs_on+0x7d/0x100 ? ktime_get_coarse_real_ts64+0x1b7/0x200 ? ktime_get_coarse_real_ts64+0x147/0x200 ? __audit_syscall_entry+0x396/0x500 __x64_sys_connect+0x72/0xb0 do_syscall_64+0x38/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes the issue by getting/creating the tunnel before locking the pppol2tp socket. | ||||
| CVE-2023-53828 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor() KSAN reports use-after-free in hci_add_adv_monitor(). While adding an adv monitor, hci_add_adv_monitor() calls -> msft_add_monitor_pattern() calls -> msft_add_monitor_sync() calls -> msft_le_monitor_advertisement_cb() calls in an error case -> hci_free_adv_monitor() which frees the *moniter. This is referenced by bt_dev_dbg() in hci_add_adv_monitor(). Fix the bt_dev_dbg() by using handle instead of monitor->handle. | ||||
| CVE-2023-53819 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: amdgpu: validate offset_in_bo of drm_amdgpu_gem_va This is motivated by OOB access in amdgpu_vm_update_range when offset_in_bo+map_size overflows. v2: keep the validations in amdgpu_vm_bo_map v3: add the validations to amdgpu_vm_bo_map/amdgpu_vm_bo_replace_map rather than to amdgpu_gem_va_ioctl | ||||
| CVE-2023-53781 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smc: Fix use-after-free in tcp_write_timer_handler(). With Eric's ref tracker, syzbot finally found a repro for use-after-free in tcp_write_timer_handler() by kernel TCP sockets. [0] If SMC creates a kernel socket in __smc_create(), the kernel socket is supposed to be freed in smc_clcsock_release() by calling sock_release() when we close() the parent SMC socket. However, at the end of smc_clcsock_release(), the kernel socket's sk_state might not be TCP_CLOSE. This means that we have not called inet_csk_destroy_sock() in __tcp_close() and have not stopped the TCP timers. The kernel socket's TCP timers can be fired later, so we need to hold a refcnt for net as we do for MPTCP subflows in mptcp_subflow_create_socket(). [0]: leaked reference. sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108) inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244) __sock_create (net/socket.c:1546) smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284) __sock_create (net/socket.c:1546) __sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661) __x64_sys_socket (net/socket.c:1672) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) ================================================================== BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091 CPU: 0 PID: 18091 Comm: syzrepro Tainted: G W 6.3.0-rc4-01174-gb5d54eb5899a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) kasan_report (mm/kasan/report.c:538) tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) tcp_write_timer (./include/linux/spinlock.h:390 net/ipv4/tcp_timer.c:643) call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701) __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2022) run_timer_softirq (kernel/time/timer.c:2037) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) __irq_exit_rcu (kernel/softirq.c:445 kernel/softirq.c:650) irq_exit_rcu (kernel/softirq.c:664) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1107 (discriminator 14)) </IRQ> | ||||
| CVE-2023-53818 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: zynq: Fix refcount leak in zynq_early_slcr_init of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on error path. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2023-53797 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Use ktime_t rather than int when dealing with timestamps Code which interacts with timestamps needs to use the ktime_t type returned by functions like ktime_get. The int type does not offer enough space to store these values, and attempting to use it is a recipe for problems. In this particular case, overflows would occur when calculating/storing timestamps leading to incorrect values being reported to userspace. In some cases these bad timestamps cause input handling in userspace to appear hung. | ||||
| CVE-2023-53795 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: IOMMUFD_DESTROY should not increase the refcount syzkaller found a race where IOMMUFD_DESTROY increments the refcount: obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY); if (IS_ERR(obj)) return PTR_ERR(obj); iommufd_ref_to_users(obj); /* See iommufd_ref_to_users() */ if (!iommufd_object_destroy_user(ucmd->ictx, obj)) As part of the sequence to join the two existing primitives together. Allowing the refcount the be elevated without holding the destroy_rwsem violates the assumption that all temporary refcount elevations are protected by destroy_rwsem. Racing IOMMUFD_DESTROY with iommufd_object_destroy_user() will cause spurious failures: WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478 Modules linked in: CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477 Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41 RSP: 0018:ffffc90003067e08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500 R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88 R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline] iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813 iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The solution is to not increment the refcount on the IOMMUFD_DESTROY path at all. Instead use the xa_lock to serialize everything. The refcount check == 1 and xa_erase can be done under a single critical region. This avoids the need for any refcount incrementing. It has the downside that if userspace races destroy with other operations it will get an EBUSY instead of waiting, but this is kind of racing is already dangerous. | ||||
| CVE-2023-53864 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable() When disabling overlay plane in mxsfb_plane_overlay_atomic_update(), overlay plane's framebuffer pointer is NULL. So, dereferencing it would cause a kernel Oops(NULL pointer dereferencing). Fix the issue by disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead. | ||||
| CVE-2022-50637 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut() If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(), the program will return, resulting in "table" resource is not released. | ||||
| CVE-2023-53838 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: synchronize atomic write aborts To fix a race condition between atomic write aborts, I use the inode lock and make COW inode to be re-usable thoroughout the whole atomic file inode lifetime. | ||||
| CVE-2023-53808 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix memory leak in mwifiex_histogram_read() Always free the zeroed page on return from 'mwifiex_histogram_read()'. | ||||
| CVE-2023-53799 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: api - Use work queue in crypto_destroy_instance The function crypto_drop_spawn expects to be called in process context. However, when an instance is unregistered while it still has active users, the last user may cause the instance to be freed in atomic context. Fix this by delaying the freeing to a work queue. | ||||
| CVE-2022-50633 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init of_icc_get() alloc resources for path handle, we should release it when not need anymore. Like the release in dwc3_qcom_interconnect_exit() function. Add icc_put() in error handling to fix this. | ||||
| CVE-2022-50657 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: mm: add missing memcpy in kasan_init Hi Atish, It seems that the panic is due to the missing memcpy during kasan_init. Could you please check whether this patch is helpful? When doing kasan_populate, the new allocated base_pud/base_p4d should contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy to avoid page fault when read/write kasan shadow region. Tested on: - qemu with sv57 and CONFIG_KASAN on. - qemu with sv48 and CONFIG_KASAN on. | ||||
| CVE-2022-50663 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix possible memory leak in stmmac_dvr_probe() The bitmap_free() should be called to free priv->af_xdp_zc_qps when create_singlethread_workqueue() fails, otherwise there will be a memory leak, so we add the err path error_wq_init to fix it. | ||||
| CVE-2022-50641 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HSI: omap_ssi: Fix refcount leak in ssi_probe When returning or breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node to possibly release the node. | ||||
| CVE-2022-50661 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: seccomp: Move copy_seccomp() to no failure path. Our syzbot instance reported memory leaks in do_seccomp() [0], similar to the report [1]. It shows that we miss freeing struct seccomp_filter and some objects included in it. We can reproduce the issue with the program below [2] which calls one seccomp() and two clone() syscalls. The first clone()d child exits earlier than its parent and sends a signal to kill it during the second clone(), more precisely before the fatal_signal_pending() test in copy_process(). When the parent receives the signal, it has to destroy the embryonic process and return -EINTR to user space. In the failure path, we have to call seccomp_filter_release() to decrement the filter's refcount. Initially, we called it in free_task() called from the failure path, but the commit 3a15fb6ed92c ("seccomp: release filter after task is fully dead") moved it to release_task() to notify user space as early as possible that the filter is no longer used. To keep the change and current seccomp refcount semantics, let's move copy_seccomp() just after the signal check and add a WARN_ON_ONCE() in free_task() for future debugging. [0]: unreferenced object 0xffff8880063add00 (size 256): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.914s) hex dump (first 32 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: do_seccomp (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/seccomp.c:666 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffffc90000035000 (size 4096): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: __vmalloc_node_range (mm/vmalloc.c:3226) __vmalloc_node (mm/vmalloc.c:3261 (discriminator 4)) bpf_prog_alloc_no_stats (kernel/bpf/core.c:91) bpf_prog_alloc (kernel/bpf/core.c:129) bpf_prog_create_from_user (net/core/filter.c:1414) do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffff888003fa1000 (size 1024): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: bpf_prog_alloc_no_stats (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/bpf/core.c:95) bpf_prog_alloc (kernel/bpf/core.c:129) bpf_prog_create_from_user (net/core/filter.c:1414) do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffff888006360240 (size 16): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s) hex dump (first 16 bytes): 01 00 37 00 76 65 72 6c e0 83 01 06 80 88 ff ff ..7.verl........ backtrace: bpf_prog_store_orig_filter (net/core/filter.c:1137) bpf_prog_create_from_user (net/core/filter.c:1428) do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffff888 ---truncated--- | ||||
| CVE-2022-50660 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2200: fix memory leak in ipw_wdev_init() In the error path of ipw_wdev_init(), exception value is returned, and the memory applied for in the function is not released. Also the memory is not released in ipw_pci_probe(). As a result, memory leakage occurs. So memory release needs to be added to the error path of ipw_wdev_init(). | ||||
| CVE-2022-50675 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored Prior to commit 69e3b846d8a7 ("arm64: mte: Sync tags for pages where PTE is untagged"), mte_sync_tags() was only called for pte_tagged() entries (those mapped with PROT_MTE). Therefore mte_sync_tags() could safely use test_and_set_bit(PG_mte_tagged, &page->flags) without inadvertently setting PG_mte_tagged on an untagged page. The above commit was required as guests may enable MTE without any control at the stage 2 mapping, nor a PROT_MTE mapping in the VMM. However, the side-effect was that any page with a PTE that looked like swap (or migration) was getting PG_mte_tagged set automatically. A subsequent page copy (e.g. migration) copied the tags to the destination page even if the tags were owned by KASAN. This issue was masked by the page_kasan_tag_reset() call introduced in commit e5b8d9218951 ("arm64: mte: reset the page tag in page->flags"). When this commit was reverted (20794545c146), KASAN started reporting access faults because the overriding tags in a page did not match the original page->flags (with CONFIG_KASAN_HW_TAGS=y): BUG: KASAN: invalid-access in copy_page+0x10/0xd0 arch/arm64/lib/copy_page.S:26 Read at addr f5ff000017f2e000 by task syz-executor.1/2218 Pointer tag: [f5], memory tag: [f2] Move the PG_mte_tagged bit setting from mte_sync_tags() to the actual place where tags are cleared (mte_sync_page_tags()) or restored (mte_restore_tags()). | ||||