Filtered by vendor Linux
Subscriptions
Total
16909 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68235 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: Add missing kfree() of nvkm_falcon_fw::boot nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a kmemleak warning. Make sure this data is deallocated. | ||||
| CVE-2025-68232 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: veth: more robust handing of race to avoid txq getting stuck Commit dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") introduced a race condition that can lead to a permanently stalled TXQ. This was observed in production on ARM64 systems (Ampere Altra Max). The race occurs in veth_xmit(). The producer observes a full ptr_ring and stops the queue (netif_tx_stop_queue()). The subsequent conditional logic, intended to re-wake the queue if the consumer had just emptied it (if (__ptr_ring_empty(...)) netif_tx_wake_queue()), can fail. This leads to a "lost wakeup" where the TXQ remains stopped (QUEUE_STATE_DRV_XOFF) and traffic halts. This failure is caused by an incorrect use of the __ptr_ring_empty() API from the producer side. As noted in kernel comments, this check is not guaranteed to be correct if a consumer is operating on another CPU. The empty test is based on ptr_ring->consumer_head, making it reliable only for the consumer. Using this check from the producer side is fundamentally racy. This patch fixes the race by adopting the more robust logic from an earlier version V4 of the patchset, which always flushed the peer: (1) In veth_xmit(), the racy conditional wake-up logic and its memory barrier are removed. Instead, after stopping the queue, we unconditionally call __veth_xdp_flush(rq). This guarantees that the NAPI consumer is scheduled, making it solely responsible for re-waking the TXQ. This handles the race where veth_poll() consumes all packets and completes NAPI *before* veth_xmit() on the producer side has called netif_tx_stop_queue. The __veth_xdp_flush(rq) will observe rx_notify_masked is false and schedule NAPI. (2) On the consumer side, the logic for waking the peer TXQ is moved out of veth_xdp_rcv() and placed at the end of the veth_poll() function. This placement is part of fixing the race, as the netif_tx_queue_stopped() check must occur after rx_notify_masked is potentially set to false during NAPI completion. This handles the race where veth_poll() consumes all packets, but haven't finished (rx_notify_masked is still true). The producer veth_xmit() stops the TXQ and __veth_xdp_flush(rq) will observe rx_notify_masked is true, meaning not starting NAPI. Then veth_poll() change rx_notify_masked to false and stops NAPI. Before exiting veth_poll() will observe TXQ is stopped and wake it up. | ||||
| CVE-2025-68228 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/plane: Fix create_in_format_blob() return value create_in_format_blob() is either supposed to return a valid pointer or an error, but never NULL. The caller will dereference the blob when it is not an error, and thus will oops if NULL returned. Return proper error values in the failure cases. | ||||
| CVE-2025-68222 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its fields are initialized. Notably, num_custom_params is used in pinconf_generic_parse_dt_config(), resulting in intermittent allocation errors, such as the following splat when probing i2c-imx: WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300 [...] Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT) [...] Call trace: __alloc_pages_noprof+0x290/0x300 (P) ___kmalloc_large_node+0x84/0x168 __kmalloc_large_node_noprof+0x34/0x120 __kmalloc_noprof+0x2ac/0x378 pinconf_generic_parse_dt_config+0x68/0x1a0 s32_dt_node_to_map+0x104/0x248 dt_to_map_one_config+0x154/0x1d8 pinctrl_dt_to_map+0x12c/0x280 create_pinctrl+0x6c/0x270 pinctrl_get+0xc0/0x170 devm_pinctrl_get+0x50/0xa0 pinctrl_bind_pins+0x60/0x2a0 really_probe+0x60/0x3a0 [...] __platform_driver_register+0x2c/0x40 i2c_adap_imx_init+0x28/0xff8 [i2c_imx] [...] This results in later parse failures that can cause issues in dependent drivers: s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property [...] pca953x 0-0022: failed writing register: -6 i2c i2c-0: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property i2c i2c-1: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property i2c i2c-2: IMX I2C adapter registered Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of devm_kmalloc() in s32_pinctrl_probe(), which sets the previously uninitialized fields to zero. | ||||
| CVE-2025-68219 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix memory leak in smb3_fs_context_parse_param error path Add proper cleanup of ctx->source and fc->source to the cifs_parse_mount_err error handler. This ensures that memory allocated for the source strings is correctly freed on all error paths, matching the cleanup already performed in the success path by smb3_cleanup_fs_context_contents(). Pointers are also set to NULL after freeing to prevent potential double-free issues. This change fixes a memory leak originally detected by syzbot. The leak occurred when processing Opt_source mount options if an error happened after ctx->source and fc->source were successfully allocated but before the function completed. The specific leak sequence was: 1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory 2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory 3. A subsequent error jumps to cifs_parse_mount_err 4. The old error handler freed passwords but not the source strings, causing the memory to leak. This issue was not addressed by commit e8c73eb7db0a ("cifs: client: fix memory leak in smb3_fs_context_parse_param"), which only fixed leaks from repeated fsconfig() calls but not this error path. Patch updated with minor change suggested by kernel test robot | ||||
| CVE-2025-68216 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Disable trampoline for kernel module function trace The current LoongArch BPF trampoline implementation is incompatible with tracing functions in kernel modules. This causes several severe and user-visible problems: * The `bpf_selftests/module_attach` test fails consistently. * Kernel lockup when a BPF program is attached to a module function [1]. * Critical kernel modules like WireGuard experience traffic disruption when their functions are traced with fentry [2]. Given the severity and the potential for other unknown side-effects, it is safest to disable the feature entirely for now. This patch prevents the BPF subsystem from allowing trampoline attachments to kernel module functions on LoongArch. This is a temporary mitigation until the core issues in the trampoline code for kernel module handling can be identified and fixed. [root@fedora bpf]# ./test_progs -a module_attach -v bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP test_module_attach:FAIL:skel_attach skeleton attach failed: -524 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. [1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/ [2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/ | ||||
| CVE-2025-68215 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP cleanup on driver removal in error path Improve the cleanup on releasing PTP resources in error path. The error case might happen either at the driver probe and PTP feature initialization or on PTP restart (errors in reset handling, NVM update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf function) and 'ps_lock' mutex deinitialization were missed. Additionally, ptp clock was not unregistered in the latter case. Keep PTP state as 'uninitialized' on init to distinguish between error scenarios and to avoid resource release duplication at driver removal. The consequence of missing ice_ptp_cleanup_pf call is the following call trace dumped when ice_adapter object is freed (port list is not empty, as it is required at this stage): [ T93022] ------------[ cut here ]------------ [ T93022] WARNING: CPU: 10 PID: 93022 at ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice] ... [ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice] ... [ T93022] Call Trace: [ T93022] <TASK> [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? __warn.cold+0xb0/0x10e [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? report_bug+0xd8/0x150 [ T93022] ? handle_bug+0xe9/0x110 [ T93022] ? exc_invalid_op+0x17/0x70 [ T93022] ? asm_exc_invalid_op+0x1a/0x20 [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] pci_device_remove+0x42/0xb0 [ T93022] device_release_driver_internal+0x19f/0x200 [ T93022] driver_detach+0x48/0x90 [ T93022] bus_remove_driver+0x70/0xf0 [ T93022] pci_unregister_driver+0x42/0xb0 [ T93022] ice_module_exit+0x10/0xdb0 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] ... [ T93022] ---[ end trace 0000000000000000 ]--- [ T93022] ice: module unloaded | ||||
| CVE-2025-68213 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. | ||||
| CVE-2025-68304 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: lookup hci_conn on RX path on protocol side The hdev lock/lookup/unlock/use pattern in the packet RX path doesn't ensure hci_conn* is not concurrently modified/deleted. This locking appears to be leftover from before conn_hash started using RCU commit bf4c63252490b ("Bluetooth: convert conn hash to RCU") and not clear if it had purpose since then. Currently, there are code paths that delete hci_conn* from elsewhere than the ordered hdev->workqueue where the RX work runs in. E.g. commit 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync") introduced some of these, and there probably were a few others before it. It's better to do the locking so that even if these run concurrently no UAF is possible. Move the lookup of hci_conn and associated socket-specific conn to protocol recv handlers, and do them within a single critical section to cover hci_conn* usage and lookup. syzkaller has reported a crash that appears to be this issue: [Task hdev->workqueue] [Task 2] hci_disconnect_all_sync l2cap_recv_acldata(hcon) hci_conn_get(hcon) hci_abort_conn_sync(hcon) hci_dev_lock hci_dev_lock hci_conn_del(hcon) v-------------------------------- hci_dev_unlock hci_conn_put(hcon) conn = hcon->l2cap_data (UAF) | ||||
| CVE-2025-68303 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel: punit_ipc: fix memory corruption This passes the address of the pointer "&punit_ipcdev" when the intent was to pass the pointer itself "punit_ipcdev" (without the ampersand). This means that the: complete(&ipcdev->cmd_complete); in intel_punit_ioc() will write to a wrong memory address corrupting it. | ||||
| CVE-2025-68234 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd_net: fix wrong argument types for skb_queue_splice() If timestamp retriving needs to be retried and the local list of SKB's already has entries, then it's spliced back into the socket queue. However, the arguments for the splice helper are transposed, causing exactly the wrong direction of splicing into the on-stack list. Fix that up. | ||||
| CVE-2025-68260 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: fix race condition on death_list Rust Binder contains the following unsafe operation: // SAFETY: A `NodeDeath` is never inserted into the death list // of any node other than its owner, so it is either in this // death list or in no death list. unsafe { node_inner.death_list.remove(self) }; This operation is unsafe because when touching the prev/next pointers of a list element, we have to ensure that no other thread is also touching them in parallel. If the node is present in the list that `remove` is called on, then that is fine because we have exclusive access to that list. If the node is not in any list, then it's also ok. But if it's present in a different list that may be accessed in parallel, then that may be a data race on the prev/next pointers. And unfortunately that is exactly what is happening here. In Node::release, we: 1. Take the lock. 2. Move all items to a local list on the stack. 3. Drop the lock. 4. Iterate the local list on the stack. Combined with threads using the unsafe remove method on the original list, this leads to memory corruption of the prev/next pointers. This leads to crashes like this one: Unable to handle kernel paging request at virtual address 000bb9841bcac70e Mem abort info: ESR = 0x0000000096000044 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [000bb9841bcac70e] address between user and kernel address ranges Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP google-cdd 538c004.gcdd: context saved(CPU:1) item - log_kevents is disabled Modules linked in: ... rust_binder CPU: 1 UID: 0 PID: 2092 Comm: kworker/1:178 Tainted: G S W OE 6.12.52-android16-5-g98debd5df505-4k #1 f94a6367396c5488d635708e43ee0c888d230b0b Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: MUSTANG PVT 1.0 based on LGA (DT) Workqueue: events _RNvXs6_NtCsdfZWD8DztAw_6kernel9workqueueINtNtNtB7_4sync3arc3ArcNtNtCs8QPsHWIn21X_16rust_binder_main7process7ProcessEINtB5_15WorkItemPointerKy0_E3runB13_ [rust_binder] pstate: 23400005 (nzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x450/0x11f8 [rust_binder] lr : _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x464/0x11f8 [rust_binder] sp : ffffffc09b433ac0 x29: ffffffc09b433d30 x28: ffffff8821690000 x27: ffffffd40cbaa448 x26: ffffff8821690000 x25: 00000000ffffffff x24: ffffff88d0376578 x23: 0000000000000001 x22: ffffffc09b433c78 x21: ffffff88e8f9bf40 x20: ffffff88e8f9bf40 x19: ffffff882692b000 x18: ffffffd40f10bf00 x17: 00000000c006287d x16: 00000000c006287d x15: 00000000000003b0 x14: 0000000000000100 x13: 000000201cb79ae0 x12: fffffffffffffff0 x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000000 x8 : b80bb9841bcac706 x7 : 0000000000000001 x6 : fffffffebee63f30 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000004c31 x1 : ffffff88216900c0 x0 : ffffff88e8f9bf00 Call trace: _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x450/0x11f8 [rust_binder bbc172b53665bbc815363b22e97e3f7e3fe971fc] process_scheduled_works+0x1c4/0x45c worker_thread+0x32c/0x3e8 kthread+0x11c/0x1c8 ret_from_fork+0x10/0x20 Code: 94218d85 b4000155 a94026a8 d10102a0 (f9000509) ---[ end trace 0000000000000000 ]--- Thus, modify Node::release to pop items directly off the original list. | ||||
| CVE-2025-68302 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: fix potential NULL dereference in sxgbe_rx() Currently, when skb is null, the driver prints an error and then dereferences skb on the next line. To fix this, let's add a 'break' after the error message to switch to sxgbe_rx_refill(), which is similar to the approach taken by the other drivers in this particular case, e.g. calxeda with xgmac_rx(). Found during a code review. | ||||
| CVE-2025-68306 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interface When performing reset tests and encountering abnormal card drop issues that lead to a kernel crash, it is necessary to perform a null check before releasing resources to avoid attempting to release a null pointer. <4>[ 29.158070] Hardware name: Google Quigon sku196612/196613 board (DT) <4>[ 29.158076] Workqueue: hci0 hci_cmd_sync_work [bluetooth] <4>[ 29.158154] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) <4>[ 29.158162] pc : klist_remove+0x90/0x158 <4>[ 29.158174] lr : klist_remove+0x88/0x158 <4>[ 29.158180] sp : ffffffc0846b3c00 <4>[ 29.158185] pmr_save: 000000e0 <4>[ 29.158188] x29: ffffffc0846b3c30 x28: ffffff80cd31f880 x27: ffffff80c1bdc058 <4>[ 29.158199] x26: dead000000000100 x25: ffffffdbdc624ea3 x24: ffffff80c1bdc4c0 <4>[ 29.158209] x23: ffffffdbdc62a3e6 x22: ffffff80c6c07000 x21: ffffffdbdc829290 <4>[ 29.158219] x20: 0000000000000000 x19: ffffff80cd3e0648 x18: 000000031ec97781 <4>[ 29.158229] x17: ffffff80c1bdc4a8 x16: ffffffdc10576548 x15: ffffff80c1180428 <4>[ 29.158238] x14: 0000000000000000 x13: 000000000000e380 x12: 0000000000000018 <4>[ 29.158248] x11: ffffff80c2a7fd10 x10: 0000000000000000 x9 : 0000000100000000 <4>[ 29.158257] x8 : 0000000000000000 x7 : 7f7f7f7f7f7f7f7f x6 : 2d7223ff6364626d <4>[ 29.158266] x5 : 0000008000000000 x4 : 0000000000000020 x3 : 2e7325006465636e <4>[ 29.158275] x2 : ffffffdc11afeff8 x1 : 0000000000000000 x0 : ffffffdc11be4d0c <4>[ 29.158285] Call trace: <4>[ 29.158290] klist_remove+0x90/0x158 <4>[ 29.158298] device_release_driver_internal+0x20c/0x268 <4>[ 29.158308] device_release_driver+0x1c/0x30 <4>[ 29.158316] usb_driver_release_interface+0x70/0x88 <4>[ 29.158325] btusb_mtk_release_iso_intf+0x68/0xd8 [btusb (HASH:e8b6 5)] <4>[ 29.158347] btusb_mtk_reset+0x5c/0x480 [btusb (HASH:e8b6 5)] <4>[ 29.158361] hci_cmd_sync_work+0x10c/0x188 [bluetooth (HASH:a4fa 6)] <4>[ 29.158430] process_scheduled_works+0x258/0x4e8 <4>[ 29.158441] worker_thread+0x300/0x428 <4>[ 29.158448] kthread+0x108/0x1d0 <4>[ 29.158455] ret_from_fork+0x10/0x20 <0>[ 29.158467] Code: 91343000 940139d1 f9400268 927ff914 (f9401297) <4>[ 29.158474] ---[ end trace 0000000000000000 ]--- <0>[ 29.167129] Kernel panic - not syncing: Oops: Fatal exception <2>[ 29.167144] SMP: stopping secondary CPUs <4>[ 29.167158] ------------[ cut here ]------------ | ||||
| CVE-2025-68226 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix incomplete backport in cfids_invalidation_worker() The previous commit bdb596ceb4b7 ("smb: client: fix potential UAF in smb2_close_cached_fid()") was an incomplete backport and missed one kref_put() call in cfids_invalidation_worker() that should have been converted to close_cached_dir(). | ||||
| CVE-2025-68231 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempool: fix poisoning order>0 pages with HIGHMEM The kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 <f3> aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283) Christoph found out this is due to the poisoning code not dealing properly with CONFIG_HIGHMEM because only the first page is mapped but then the whole potentially high-order page is accessed. We could give up on HIGHMEM here, but it's straightforward to fix this with a loop that's mapping, poisoning or checking and unmapping individual pages. | ||||
| CVE-2025-68252 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to the dma_buf for comparison purposes. However, this reference is never released when the function returns, leading to a dma_buf memory leak. Fix this by adding dma_buf_put before returning from the function, ensuring that the temporarily acquired reference is properly released regardless of whether a matching map is found. Rule: add | ||||
| CVE-2025-68299 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix delayed allocation of a cell's anonymous key The allocation of a cell's anonymous key is done in a background thread along with other cell setup such as doing a DNS upcall. In the reported bug, this is triggered by afs_parse_source() parsing the device name given to mount() and calling afs_lookup_cell() with the name of the cell. The normal key lookup then tries to use the key description on the anonymous authentication key as the reference for request_key() - but it may not yet be set and so an oops can happen. This has been made more likely to happen by the fix for dynamic lookup failure. Fix this by firstly allocating a reference name and attaching it to the afs_cell record when the record is created. It can share the memory allocation with the cell name (unfortunately it can't just overlap the cell name by prepending it with "afs@" as the cell name already has a '.' prepended for other purposes). This reference name is then passed to request_key(). Secondly, the anon key is now allocated on demand at the point a key is requested in afs_request_key() if it is not already allocated. A mutex is used to prevent multiple allocation for a cell. Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't yet allocated (if we need it) and then the caller can return -ECHILD to drop out of RCU-mode and afs_request_key() can be called. Note that the anonymous key is kind of necessary to make the key lookup cache work as that doesn't currently cache a negative lookup, but it's probably worth some investigation to see if NULL can be used instead. | ||||
| CVE-2025-40075 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: use dst_dev_net_rcu() Replace three dst_dev() with a lockdep enabled helper. | ||||
| CVE-2021-47642 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer. | ||||