Filtered by vendor Linux
Subscriptions
Total
14908 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52995 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv/kprobe: Fix instruction simulation of JALR Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following crash: [ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170 [ 32.093115] Oops [#1] [ 32.093251] Modules linked in: [ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16 [ 32.093985] Hardware name: riscv-virtio,qemu (DT) [ 32.094280] epc : ksys_read+0x88/0xd6 [ 32.094855] ra : ksys_read+0xc0/0xd6 [ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0 [ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80 [ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60 [ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708 [ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300 [ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff [ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170 [ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030 [ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410 [ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c [ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54 [ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d [ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6 [ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38 [ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2 Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)', hence it requires obtaining the target address from rs1 followed by updating rd. [Palmer: Pick Guo's cleanup] | ||||
| CVE-2025-21882 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix vport QoS cleanup on error When enabling vport QoS fails, the scheduling node was never freed, causing a leak. Add the missing free and reset the vport scheduling node pointer to NULL. | ||||
| CVE-2025-21889 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Add RCU read lock protection to perf_iterate_ctx() The perf_iterate_ctx() function performs RCU list traversal but currently lacks RCU read lock protection. This causes lockdep warnings when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y: WARNING: suspicious RCU usage kernel/events/core.c:8168 RCU-list traversed in non-reader section!! Call Trace: lockdep_rcu_suspicious ? perf_event_addr_filters_apply perf_iterate_ctx perf_event_exec begin_new_exec ? load_elf_phdrs load_elf_binary ? lock_acquire ? find_held_lock ? bprm_execve bprm_execve do_execveat_common.isra.0 __x64_sys_execve do_syscall_64 entry_SYSCALL_64_after_hwframe This protection was previously present but was removed in commit bd2756811766 ("perf: Rewrite core context handling"). Add back the necessary rcu_read_lock()/rcu_read_unlock() pair around perf_iterate_ctx() call in perf_event_exec(). [ mingo: Use scoped_guard() as suggested by Peter ] | ||||
| CVE-2025-21888 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a WARN during dereg_mr for DM type Memory regions (MR) of type DM (device memory) do not have an associated umem. In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code incorrectly takes the wrong branch, attempting to call dma_unmap_single() on a DMA address that is not mapped. This results in a WARN [1], as shown below. The issue is resolved by properly accounting for the DM type and ensuring the correct branch is selected in mlx5_free_priv_descs(). [1] WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90 Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00 RSP: 0018:ffffc90001913a10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x84/0x190 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0xf8/0x1c0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 dma_unmap_page_attrs+0xe6/0x290 mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib] __mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f537adaf17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270 R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190 R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450 </TASK> | ||||
| CVE-2025-21886 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix implicit ODP hang on parent deregistration Fix the destroy_unused_implicit_child_mr() to prevent hanging during parent deregistration as of below [1]. Upon entering destroy_unused_implicit_child_mr(), the reference count for the implicit MR parent is incremented using: refcount_inc_not_zero(). A corresponding decrement must be performed if free_implicit_child_mr_work() is not called. The code has been updated to properly manage the reference count that was incremented. [1] INFO: task python3:2157 blocked for more than 120 seconds. Not tainted 6.12.0-rc7+ #1633 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:python3 state:D stack:0 pid:2157 tgid:2157 ppid:1685 flags:0x00000000 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 __mlx5_ib_dereg_mr+0x379/0x5d0 [mlx5_ib] ? __pfx_autoremove_wake_function+0x10/0x10 ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 ? kmem_cache_free+0x221/0x400 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f20f21f017b RSP: 002b:00007ffcfc4a77c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffcfc4a78d8 RCX: 00007f20f21f017b RDX: 00007ffcfc4a78c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffcfc4a78a0 R08: 000056147d125190 R09: 00007f20f1f14c60 R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffcfc4a7890 R13: 000000000000001c R14: 000056147d100fc0 R15: 00007f20e365c9d0 </TASK> | ||||
| CVE-2025-21885 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. | ||||
| CVE-2025-21890 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) | ||||
| CVE-2025-21883 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: Fix deinitializing VF in error path If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself). | ||||
| CVE-2025-21884 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: better track kernel sockets lifetime While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2023-52998 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fec: Use page_pool_put_full_page when freeing rx buffers The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.8305 ---truncated--- | ||||
| CVE-2025-21800 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix definer's HWS_SET32 macro for negative offset When bit offset for HWS_SET32 macro is negative, UBSAN complains about the shift-out-of-bounds: UBSAN: shift-out-of-bounds in drivers/net/ethernet/mellanox/mlx5/core/steering/hws/definer.c:177:2 shift exponent -8 is negative | ||||
| CVE-2025-40019 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: essiv - Check ssize for decryption and in-place encryption Move the ssize check to the start in essiv_aead_crypt so that it's also checked for decryption and in-place encryption. | ||||
| CVE-2025-40018 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: Defer ip_vs_ftp unregister during netns cleanup On the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftp before connections with valid cp->app pointers are flushed, leading to a use-after-free. Fix this by introducing a global `exiting_module` flag, set to true in ip_vs_ftp_exit() before unregistering the pernet subsystem. In __ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netns cleanup (when exiting_module is false) and defer it to __ip_vs_cleanup_batch(), which unregisters all apps after all connections are flushed. If called during module exit, unregister ip_vs_ftp immediately. | ||||
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2025-39998 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: target_core_configfs: Add length check to avoid buffer overflow A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprintf() returns the total number of bytes that would have been written (the length of %s/%sn ), this value may exceed the buffer length (256 bytes) passed to memcpy(), this will ultimately cause function memcpy reporting a buffer overflow error. An additional check of the return value of snprintf() can avoid this buffer overflow. | ||||
| CVE-2025-39996 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) flexcop_pci_remove() | flexcop_pci_irq_check_work() cancel_delayed_work() | flexcop_device_kfree(fc_pci->fc_dev) | | fc = fc_pci->fc_dev; // UAF This is confirmed by a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff8880093aa8c8 by task bash/135 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x1be/0x460 flexcop_device_kmalloc+0x54/0xe0 flexcop_pci_probe+0x1f/0x9d0 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 135: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 flexcop_device_kfree+0x32/0x50 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work has finished before the device memory is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced artificial delays within the flexcop_pci_irq_check_work() function to increase the likelihood of triggering the bug. | ||||
| CVE-2025-39995 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. | ||||
| CVE-2025-39994 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_sleep() cancel_delayed_work() | hybrid_tuner_release_state(priv) | kfree(priv) | | priv = container_of() // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the timer_sleep is properly canceled before the xc5000_priv memory is deallocated. A deadlock concern was considered: xc5000_release() is called in a process context and is not holding any locks that the timer_sleep work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was initially identified through static analysis. [hverkuil: fix typo in Subject: tunner -> tuner] | ||||
| CVE-2025-39993 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: fix races with imon_disconnect() Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465 CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __create_pipe include/linux/usb.h:1945 [inline] send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991 vfs_write+0x2d7/0xdd0 fs/read_write.c:576 ksys_write+0x127/0x250 fs/read_write.c:631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The iMON driver improperly releases the usb_device reference in imon_disconnect without coordinating with active users of the device. Specifically, the fields usbdev_intf0 and usbdev_intf1 are not protected by the users counter (ictx->users). During probe, imon_init_intf0 or imon_init_intf1 increments the usb_device reference count depending on the interface. However, during disconnect, usb_put_dev is called unconditionally, regardless of actual usage. As a result, if vfd_write or other operations are still in progress after disconnect, this can lead to a use-after-free of the usb_device pointer. Thread 1 vfd_write Thread 2 imon_disconnect ... if usb_put_dev(ictx->usbdev_intf0) else usb_put_dev(ictx->usbdev_intf1) ... while send_packet if pipe = usb_sndintpipe( ictx->usbdev_intf0) UAF else pipe = usb_sndctrlpipe( ictx->usbdev_intf0, 0) UAF Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by checking ictx->disconnected in all writer paths. Add early return with -ENODEV in send_packet(), vfd_write(), lcd_write() and display_open() if the device is no longer present. Set and read ictx->disconnected under ictx->lock to ensure memory synchronization. Acquire the lock in imon_disconnect() before setting the flag to synchronize with any ongoing operations. Ensure writers exit early and safely after disconnect before the USB core proceeds with cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2025-39678 | 1 Linux | 1 Linux Kernel | 2025-10-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL If metric table address is not allocated, accessing metrics_bin will result in a NULL pointer dereference, so add a check. | ||||