Total
1552 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-14299 | 2025-12-20 | N/A | ||
| The HTTPS server on Tapo C200 V3 does not properly validate the Content-Length header, which can lead to an integer overflow. An unauthenticated attacker on the same local network segment can send crafted HTTPS requests to trigger excessive memory allocation, causing the device to crash and resulting in denial-of-service (DoS). | ||||
| CVE-2025-41694 | 1 Phoenixcontact | 140 Fl Nat 2008, Fl Nat 2008 Firmware, Fl Nat 2208 and 137 more | 2025-12-19 | 6.5 Medium |
| A low privileged remote attacker can run the webshell with an empty command containing whitespace. The server will then block until it receives more data, resulting in a DoS condition of the websserver. | ||||
| CVE-2025-41693 | 1 Phoenixcontact | 140 Fl Nat 2008, Fl Nat 2008 Firmware, Fl Nat 2208 and 137 more | 2025-12-19 | 4.3 Medium |
| A low privileged remote attacker can use the ssh feature to execute commands directly after login. The process stays open and uses resources which leads to a reduced performance of the management functions. Switching functionality is not affected. | ||||
| CVE-2025-68388 | 1 Elastic | 1 Packetbeat | 2025-12-19 | 5.3 Medium |
| Allocation of resources without limits or throttling (CWE-770) allows an unauthenticated remote attacker to cause excessive allocation (CAPEC-130) of memory and CPU via the integration of malicious IPv4 fragments, leading to a degradation in Packetbeat. | ||||
| CVE-2025-68390 | 1 Elastic | 1 Elasticsearch | 2025-12-19 | 4.9 Medium |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Elasticsearch can allow an authenticated user with snapshot restore privileges to cause Excessive Allocation (CAPEC-130) of memory and a denial of service (DoS) via crafted HTTP request. | ||||
| CVE-2025-68389 | 1 Elastic | 1 Kibana | 2025-12-19 | 6.5 Medium |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can allow a low-privileged authenticated user to cause Excessive Allocation (CAPEC-130) of computing resources and a denial of service (DoS) of the Kibana process via a crafted HTTP request. | ||||
| CVE-2025-68384 | 1 Elastic | 1 Elasticsearch | 2025-12-19 | 6.5 Medium |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Elasticsearch can allow a low-privileged authenticated user to cause Excessive Allocation (CAPEC-130) causing a persistent denial of service (OOM crash) via submission of oversized user settings data. | ||||
| CVE-2025-66473 | 1 Xwiki | 2 Xwiki, Xwiki-platform | 2025-12-19 | 7.5 High |
| XWiki is an open-source wiki software platform. Versions 16.10.10 and below, 17.0.0-rc-1 through 17.4.3 and 17.5.0-rc-1 through 17.6.0 contain a REST API which doesn't enforce any limits for the number of items that can be requested in a single request at the moment. Depending on the number of pages in the wiki and the memory configuration, this can lead to slowness and unavailability of the wiki. As an example, the /rest/wikis/xwiki/spaces resource returns all spaces on the wiki by default, which are basically all pages. This issue is fixed in versions 17.4.4 and 16.10.11. | ||||
| CVE-2025-59089 | 1 Redhat | 8 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 5 more | 2025-12-19 | 5.9 Medium |
| If an attacker causes kdcproxy to connect to an attacker-controlled KDC server (e.g. through server-side request forgery), they can exploit the fact that kdcproxy does not enforce bounds on TCP response length to conduct a denial-of-service attack. While receiving the KDC's response, kdcproxy copies the entire buffered stream into a new buffer on each recv() call, even when the transfer is incomplete, causing excessive memory allocation and CPU usage. Additionally, kdcproxy accepts incoming response chunks as long as the received data length is not exactly equal to the length indicated in the response header, even when individual chunks or the total buffer exceed the maximum length of a Kerberos message. This allows an attacker to send unbounded data until the connection timeout is reached (approximately 12 seconds), exhausting server memory or CPU resources. Multiple concurrent requests can cause accept queue overflow, denying service to legitimate clients. | ||||
| CVE-2025-36035 | 1 Ibm | 24 Power9 System Firmware, Power System E1050 \(9043-mrx\), Power System E1080 \(9080-hex\) and 21 more | 2025-12-19 | 6.7 Medium |
| IBM PowerVM Hypervisor FW950.00 through FW950.E0, FW1050.00 through FW1050.50, and FW1060.00 through FW1060.40 could allow a local privileged user to cause a denial of service by issuing a specially crafted IBM i hypervisor call that would disclose memory contents or consume excessive memory resources. | ||||
| CVE-2024-4029 | 1 Redhat | 7 Build Keycloak, Jboss Data Grid, Jboss Enterprise Application Platform and 4 more | 2025-12-19 | 4.1 Medium |
| A vulnerability was found in Wildfly’s management interface. Due to the lack of limitation of sockets for the management interface, it may be possible to cause a denial of service hitting the nofile limit as there is no possibility to configure or set a maximum number of connections. | ||||
| CVE-2025-63402 | 1 Hcltech | 1 Dragon | 2025-12-18 | 5.5 Medium |
| An issue in HCL Technologies Limited HCLTech GRAGON before v.7.6.0 allows a remote attacker to execute arbitrary code via APIs do not enforcing limits on the number or size of requests | ||||
| CVE-2025-6203 | 1 Hashicorp | 2 Vault, Vault Enterprise | 2025-12-18 | 7.5 High |
| A malicious user may submit a specially-crafted complex payload that otherwise meets the default request size limit which results in excessive memory and CPU consumption of Vault. This may lead to a timeout in Vault’s auditing subroutine, potentially resulting in the Vault server to become unresponsive. This vulnerability, CVE-2025-6203, is fixed in Vault Community Edition 1.20.3 and Vault Enterprise 1.20.3, 1.19.9, 1.18.14, and 1.16.25. | ||||
| CVE-2014-125127 | 2 Flight Project, Flightphp | 2 Flight, Flight | 2025-12-18 | 7.5 High |
| The mikecao/flight PHP framework in versions prior to v1.2 is vulnerable to Denial of Service (DoS) attacks due to eager loading of request bodies in the Request class constructor. The framework automatically reads the entire request body on every HTTP request, regardless of whether the application needs it. An attacker can exploit this by sending requests with large payloads, causing excessive memory consumption and potentially exhausting available server memory, leading to application crashes or service unavailability. The vulnerability was fixed in v1.2 by implementing lazy loading of request bodies. | ||||
| CVE-2023-23603 | 2 Mozilla, Redhat | 8 Firefox, Firefox Esr, Thunderbird and 5 more | 2025-12-18 | 6.5 Medium |
| Regular expressions used to filter out forbidden properties and values from style directives in calls to `console.log` weren't accounting for external URLs. Data could then be potentially exfiltrated from the browser. This vulnerability affects Firefox < 109, Firefox ESR < 102.7, and Thunderbird < 102.7. | ||||
| CVE-2023-4578 | 2 Mozilla, Redhat | 8 Firefox, Firefox Esr, Thunderbird and 5 more | 2025-12-18 | 6.5 Medium |
| When calling `JS::CheckRegExpSyntax` a Syntax Error could have been set which would end in calling `convertToRuntimeErrorAndClear`. A path in the function could attempt to allocate memory when none is available which would have caused a newly created Out of Memory exception to be mishandled as a Syntax Error. This vulnerability affects Firefox < 117, Firefox ESR < 115.2, and Thunderbird < 115.2. | ||||
| CVE-2025-68156 | 2025-12-18 | 7.5 High | ||
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.7, several builtin functions in Expr, including `flatten`, `min`, `max`, `mean`, and `median`, perform recursive traversal over user-provided data structures without enforcing a maximum recursion depth. If the evaluation environment contains deeply nested or cyclic data structures, these functions may recurse indefinitely until exceed the Go runtime stack limit. This results in a stack overflow panic, causing the host application to crash. While exploitability depends on whether an attacker can influence or inject cyclic or pathologically deep data into the evaluation environment, this behavior represents a denial-of-service (DoS) risk and affects overall library robustness. Instead of returning a recoverable evaluation error, the process may terminate unexpectedly. In affected versions, evaluation of expressions that invoke certain builtin functions on untrusted or insufficiently validated data structures can lead to a process-level crash due to stack exhaustion. This issue is most relevant in scenarios where Expr is used to evaluate expressions against externally supplied or dynamically constructed environments; cyclic references (directly or indirectly) can be introduced into arrays, maps, or structs; and there are no application-level safeguards preventing deeply nested input data. In typical use cases with controlled, acyclic data, the issue may not manifest. However, when present, the resulting panic can be used to reliably crash the application, constituting a denial of service. The issue has been fixed in the v1.17.7 versions of Expr. The patch introduces a maximum recursion depth limit for affected builtin functions. When this limit is exceeded, evaluation aborts gracefully and returns a descriptive error instead of panicking. Additionally, the maximum depth can be customized by users via `builtin.MaxDepth`, allowing applications with legitimate deep structures to raise the limit in a controlled manner. Users are strongly encouraged to upgrade to the patched release, which includes both the recursion guard and comprehensive test coverage to prevent regressions. For users who cannot immediately upgrade, some mitigations are recommended. Ensure that evaluation environments cannot contain cyclic references, validate or sanitize externally supplied data structures before passing them to Expr, and/or wrap expression evaluation with panic recovery to prevent a full process crash (as a last-resort defensive measure). These workarounds reduce risk but do not fully eliminate the issue without the patch. | ||||
| CVE-2025-14466 | 2025-12-18 | 5.3 Medium | ||
| A vulnerability in the web interface of the Güralp Fortimus Series, Minimus Series and Certimus Series allows an unauthenticated attacker with network access to send specially-crafted HTTP requests that can cause the web service process to deliberately restart. Although this mechanism limits the impact of the attack, it results in a brief denial-of-service condition during the restart. | ||||
| CVE-2021-47578 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Don't call kcalloc() if size arg is zero If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of that, for a following NULL pointer check to work on the returned pointer, kcalloc() must not be called with the size arg equal to zero. Return early without error before the kcalloc() call if size arg is zero. BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789 CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x3b/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline] do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline] resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline] scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2021-47182 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix scsi_mode_sense() buffer length handling Several problems exist with scsi_mode_sense() buffer length handling: 1) The allocation length field of the MODE SENSE(10) command is 16-bits, occupying bytes 7 and 8 of the CDB. With this command, access to mode pages larger than 255 bytes is thus possible. However, the CDB allocation length field is set by assigning len to byte 8 only, thus truncating buffer length larger than 255. 2) If scsi_mode_sense() is called with len smaller than 8 with sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length is increased to 8 and 4 respectively, and the buffer is zero filled with these increased values, thus corrupting the memory following the buffer. Fix these 2 problems by using put_unaligned_be16() to set the allocation length field of MODE SENSE(10) CDB and by returning an error when len is too small. Furthermore, if len is larger than 255B, always try MODE SENSE(10) first, even if the device driver did not set sdev->use_10_for_ms. In case of invalid opcode error for MODE SENSE(10), access to mode pages larger than 255 bytes are not retried using MODE SENSE(6). To avoid buffer length overflows for the MODE_SENSE(10) case, check that len is smaller than 65535 bytes. While at it, also fix the folowing: * Use get_unaligned_be16() to retrieve the mode data length and block descriptor length fields of the mode sense reply header instead of using an open coded calculation. * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable Block Descriptor, which is the opposite of what the dbd argument description was. | ||||